 | Prince High-Pressure Control Valve, Model# SVE22 Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Use with double-acting cylinders. Power beyond plug capability. U.S.A. | *$49.99 |
 | IMPERIAL 90895 BULKHEAD COUPLING 13/16" (PACK OF 5) Brand: Imperial Model: 90895 Part Number: 90895 "IMPERIAL" BULKHEAD COUPLING
Primary applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F to 400° F.
Material: carbon steel - AISI/SAE 12L14
Plating: zinc; yellow dichromate finish
Male Pipe Thread: 3/8"
Fixed Hex: 13/16"
Inside Diameter: 0.297"
Panel Face To End Length: 1.31"
Overall Length: 2.18"
Cross Reference: C5325x6 | *$49.86 |
 | IMPERIAL 91109 PERMALIGN UNION FITTING 3/16(PACK OF 10) Brand: Imperial Model: 91109 Part Number: 91109 "IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 3/16
Cross Reference: 962A-3
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi | *$49.79 |
 | Reduce Your Greenhouse Gas Brand: Sweetfilter Model: SF-110 Part Number: SF-110 Greenhouse gases destroy our Earths Ecosystem. High levels of CO2 gas (carbon dioxide) are a major cause of Global Warming. Major contributors of greenhouse gases are fully vented landfills and septic systems. Sweetfilter Zeocarbon septic vent pipe filters remove odors and greenhouse gases for up to 5 years. Then they are recycled as an ornamental gardening, nitrogen rich, fertilizer. It takes up to one year for one tree to fix the CO2 in the equivalent of 3 litres of gas. Vent pipe filters can do the same thing in one day, every day, for up to 5 years. | *$49.50 |
 | IMPERIAL 97476 DOUBLE SHUT-OFF HYDRAULIC COUPLER 1/2" - BRASS Brand: Imperial Model: 97476 Part Number: 97476 "IMPERIAL" ISO B HYDRAULIC COUPLER
Body Size: 1/2'
Female Thread: 1/2" NPTF
Tomco No.: TH4-26-002
Parker No.: BH4-60
Brass construction.
Aeroquip No.: FD45 1011-08-10
Double Shut-Off (ISO "B") Quick Coupler.
Shut-off valves on the nipple and coupler.
Interchangeability with other leading manufacturers.
Rated at a working pressure of 1,000 psi.
Temperature Range: -40° to 225° F.
Seals are made of Buna-N material.
Hose protection is the result of swivel action allowed by the coupler.
Used with Double Shut-Off (ISO "B") Quick Coupler Nipple, Part No. 97477
Positive alignment and even load distribution provided by the ball-locking mechanism. | *$49.29 |
 | Prince PTO Tractor Pump 21 GPM, Model# HC-PTO-1A Brand: Prince Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$489.99 |
 | Prince PTO Tractor Pump 23 GPM, Model# HC-PTO-3A Brand: Prince Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$484.99 |
 | 20532 Gauge Adaptor (277-GA-3) Category: Hydraulic Tool Parts Brand: Enerpac Item #: 277-GA-3. For easy mounting of a pressure gauge into your systembrMale end screws into pump or cylinder port, female end accepts hose or coupler. third port is for gauge connection pulliOperating Pressure = 10000.0 psi [Max]liGauge Port = 1/4 in (NPTF)liMale End = 3/8 in (NPTF)liFemale End = 3/8 in (NPTF)liInside Wt. = 1.60 lb/ul brCustomers also search for: Discount 20532 Gauge Adaptor, Buy 20532 Gauge Adaptor, Wholesale 20532 Gauge Adaptor, 662005205325, GA-3, Hydraulic Tool Parts and Accessories | *$48.99 |
| | IMPERIAL 90615 BULKHEAD COUPLING 1/2"x3/8" (PACK OF 2) Brand: Imperial Model: 90615 Part Number: 90615 "IMPERIAL" BULKHEAD COUPLING
Typical applications include: grease, instrumentation and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400° F.
Material: Carbon steel - ANSI/SAE 12L 14
Plating: zinc; yellow dichromate finish
Male Pipe Thread: 1/2"
Female Pipe Thread: 3/8"
Hex Nut Thread: 1-14"
Fixed Hex: 1-1/8"
Inside Diameter: 0.402"
Panel Face to End Length: 0.70"
Overall Length: 1.688" | *$48.57 |
| | IMPERIAL 90649 BULKHEAD COUPLING 15/16" (PACK OF 5) Brand: Imperial Model: 90649 Part Number: 90649 "IMPERIAL" BULKHEAD COUPLING
Bulkhead Coupling.
Typical applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400°. F.
Material: Carbon steel - AISI/SAE 12L14
Plating: Zinc; yellow dichromate finish
Female Pipe Thread: 1/4"
Hex Nut Thread: 3/416"
Fixed Hex: 1"
Hex Nut: 15/16"
Inside Diameter: 0.422"
Panel Face To End Length: 0.69"
Overall Length: 0.94" | *$48.44 |
 | Brush Research (BRMGBD3) 3in. 180 Grit Flex Engine Cylinder Hone Brand: Brush Research Part Number: BRMGBD3 WE CANNOT SHIP THIS ITEM TO APO ADDRESSES. | *$48.21 |
 | De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 3.268, B = .866, C = M10 (1 Each) Brand: Reid Supply Company Part Number: 031-S-2400 Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$48.09 |
 | Prince PTO Tractor Pump 11.4 GPM, Model# HC-PTO-2A Brand: Prince Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$479.99 |
 | Haldex 1 HP 115/208-230 Volt AC Hydraulic Power Unit, Solenoid, Model# 1530037 Brand: Haldex Mounts vertically or horizontally. 60 Hz TEFC motor turns at 3450 RPM. .097 displacement pump and 1.5 gallon reservoir. Relief valve set at 2000 PSI. 1.25 GPM with check valve to prevent back flow. U.S.A. | *$479.99 |
 | Jet 106200 JHC-200X 2 Ton Hydraulic Shop Crane Brand: Jet Model: 106200 Part Number: 106200 2 Ton Hydraulic Crane Type: Hydraulic Load Capacity: 4400 | *$472.49 |
 | Large Angle Type Mount Brand: Northern Tool Equipment For use with the 22 GPM two stage SAE A flange pumps. | *$46.99 |
 | De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 3.959, B = .709, C = None (1 Each) Brand: Reid Supply Company Part Number: 031-L-475 Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$46.96 |
| | IMPERIAL 96034 90° ELBOW SWIVEL ADAPTER - 1/2X3/4 (PACK OF 2) Brand: Imperial Model: 96034 Part Number: 96034 "IMPERIAL" SWIVEL ADAPTER
Female Pipe Swivel to Male Pipe 90° Elbow Swivel Adapter Fitting.
Typical Application: Pressure hydraulic systems
Pressure: Up to 5,000 depending on size
Material: Carbon steel AISI/SAE12L14
Plating: Zinc; yellow dichromate finish
NPSM Swivel Nut: 1/214
Male Pipe Thread Size: 3/414
Cross Reference: 9405 x 8 x 12 | *$46.69 |
 | IMPERIAL 97402 HYDRAULIC QUICK COUPLER 3/8" Brand: Imperial Model: 97402 Part Number: 97402 "IMPERIAL" HYDRAULIC QUICK COUPLER
Body Size: 3/8"
PSI: 4,000 lbs.
Cross Reference: H3-62
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 3/8ndash18;
Temperature Range: -40° F. to 250° F.
Can be used with Hydraulic Quick Coupler Nipple, Part No. #97412
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$46.69 |
| | IMPERIAL 99405 FLAT FACE O-RING CAP FITTING 1"(PACK OF 2) Brand: Imperial Model: 99405 Part Number: 99405 "IMPERIAL" O-RING CAP FITTING
Tube Outside Diameter: 3/4
For-Seal Thread Size: 1-7/1612
Cross Reference: 4129 x 16
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Cap Fitting (Reference SAE No. 520112).
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$46.19 |
 | CM COLUMBUS MCKINNON 664038 "HAMMERLOK" 80-GRADE COUPLING LINK 3/8" Brand: Columbus McKinnon Model: 664038 Part Number: 664038 "HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Grade: 80
Chain Size: 3/8"
Working Load Limit: 7,100 Lbs.
Material: Steel
Type: Folding Link | *$45.99 |
| | IMPERIAL 90950 FLARE TUBE PLUG 3/8-24" (PACK OF 5) Brand: Imperial Model: 90950 Part Number: 90950 "IMPERIAL" FLARE TUBE PLUG
45° Flare Tube Plug Fitting.
45° Flare Tube Fittings conform to ASA, ASME, SAE, and Mil. specifications
Good resistance to vibration. Use Long Nut in applications with severe vibration.
45° Flare Tube Fittings flare fittings are reusable.
Used with copper, brass, aluminum, and steel hydraulic tubing that can be flared.
Working pressure up to 2,000 psi, depending upon tubing being used. (Will withstand burst pressure up to 5,000 psi).
Temperature Range: -65° F. to 250° F. at maximum operating pressures.
Tube Outside Diameter: 3/16"
Thread Size: 3/8-24" | *$45.78 |
 | H8S , FHK Series Hydraulic, Steel Socket, 1 in. Female Pipe Brand: Foster Manufacturing | *$45.76 |
| | IMPERIAL 97366 MANIFOLD COUPLING 1/4"x1/4" NPT (PACK OF 2) Brand: Imperial Model: 97366 Part Number: 97366 "IMPERIAL" MANIFOLD COUPLING
NPT: 1/4"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.59 |
| | IMPERIAL 97367 MANIFOLD COUPLING 3/8"x1/4" NPT (PACK OF 2) Brand: Imperial Model: 97367 Part Number: 97367 "IMPERIAL" MANIFOLD COUPLING
NPT: 3/8"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.19 |
 | Haldex 1 HP 115/208-230 Volt AC Hydraulic Power Unit, Manual, Model# 1530038 Brand: Haldex Mounts vertically or horizontally. 60 Hz TEFC motor turns at 3450 RPM. .097 displacement pump and 1.5 gallon reservoir. Relief valve set at 2000 PSI. 1.25 GPM with check valve to prevent back flow. U.S.A. | *$449.99 |
 | Prince Hydraulic Hand Pump, 3000 PSI, Model# PM-HP-10B Brand: Prince Powerful! Operates a hydraulic press, dump, plow, snowblade, platform, frame straightener or similar equipment. 3 positions: 1) 1.25 cu. in. per stroke @1500 PSI, 2) .95 cu. in per stroke @ 2000 PSI, 3) .60 cu. in. per stroke @3000 PSI. One gallon reservoir. Inlet check valve, release valve. Pressure port 3/8in. NPT. Applied handle force 60-65 lbs. Use on up to 200 cu. inch, single- or double-acting cylinder. 16 1/2in.L. U.S.A. | *$449.99 |
| | IMPERIAL 91950 #H03912 SUCTION HOSE 3/4x1-3/8" ID Brand: Imperial Model: 91950 Part Number: 91950 "IMPERIAL" SUCTION HOSE
Hose ID: 3/4"
Hose OD: 1-3/8
Working pressure: 300 psi
Minimum burst pressure: 1200 psi
Minimum bend radius: 5"
Temperature range: -40° F to 212° F
Weatherhead cross reference: H03912
Use with U-Series or 430 U-Series.
Typical application: hydraulic suction hose.
Marine application J1942/1 hydraulic only, ABS and MSHA accepted.
Hose Construction: Inner Tube: nitrile blend,Cover: neoprene,Reinforcement:
3/4" to 1-1/2" - one helical cable wire and one fiber braid.
2" - one helical, straight-stranded wire and one fiber braid. | *$448.29 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2754-5 (1 Each) Brand: Reid Supply Company Part Number: CY2754-5 These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$443.00 |
 | Buyers Hydraulic Oil Suction Strainer Brand: Buyers Suction line filter assembly with 3/4in. NPT ports with bypass for cold start protection. Includes 149 micron stainless steel mesh element. This filter may be used where it is not possible to use an in-tank suction strainer. Not for use with pumps larger than 15 GPM. | *$44.99 |
 | Northman Fluid Power In-Line Hydraulic Flow Control Valve with Reverse Free Flow - 8 GPM, 3000 PSI, 3/8in. NPT Ports, Model# TCVT03 Brand: Northman Fluid Power This Northman in-line adjustable flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is full free flow over a check valve. | *$44.99 |
 | 3 Piece Punch Kit (SUN52PPK3) Brand: Sunex Part Number: 52PPK3 Item #: SUN52PPK3. pbFeatures Benefits/bulliWorks with Presses up to 50 Tons/liliMade in USA/li/ulThis 3 piece punch kit includes the following sizes: 1/2", 1" and 2". brCustomers also search for: Discount 3 Piece Punch Kit, Buy 3 Piece Punch Kit, Wholesale 3 Piece Punch Kit, 613364047170, ToolWeb, Porta Powers and Pumps | *$44.88 |
| | IMPERIAL 90922 REPLACEMENT MALE ELBOW FITTING 5/1624"x1/8" (PACK OF 5) Brand: Imperial Model: 90922 Part Number: 90922 "IMPERIAL" MALE ELBOW FITTING
Replacement Male Elbow Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Size: 1/8"
Thread Size: 5/1624"
Pipe Thread: 1/16"
Cross Reference: 284 x 2 x 1 | *$44.26 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap. = 1,250 lbs. (1 Each) Brand: Reid Supply Company Part Number: CAS-51 These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each) Brand: Reid Supply Company Part Number: SURS-51 These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$430.00 |
| | IMPERIAL 99402 FLAT FACE O-RING CAP FITTING 1/2 (PACK OF 5) Brand: Imperial Model: 99402 Part Number: 99402 "IMPERIAL" O-RING CAP FITTING
Tube Outside Diameter: 1/2
For-Seal Thread Size: 13/1616
Cross Reference: 4129 x 8
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Cap Fitting (Reference SAE No. 520112).
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$42.79 |
 | K6S/S , FHK Series Hydraulic, Stainless Steel Plug, 3/4 in. Female Pipe Brand: Foster Manufacturing | *$42.53 |
 | Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 48in. Stroke, 2in. Shaft Size Brand: Prince Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 48, Closed Pin Center (in.): 58, Shaft Diameter (in.): 2 | *$419.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 36in. Stroke, 2in.Shaft Brand: Prince Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 36, Closed Pin Center (in.): 48 1/4, Shaft Diameter (in.): 2 | *$419.99 |
 | Cast Iron Rotary Pump For Oil And Petroleum Products Brand: Global Industrial Part Number: 10210 Cast Iron Rotary Pump Easy to operate, just turn crank handle. To use as a siphon, prime pump by turning crank handle several times: liquid automatically siphons to lower level. Used for light oil and petroleum products. Dispenses 8 oz. per revolution. Fits 15, 30 and 55 gallon drums. Cast iron body with heavy duty cast iron vanes. 3 piece steel suction pipe 1-14"dia. x 40"L, strainer and 34" threaded discharge spout. Includes 2" bung adapter. Optional Drip Tray returns spills into drum, reducing waste and cleanup. Complete with hinged cover. | *$41.95 |
 | FFS06-08 , Hydraulic Flush Face Socket, 2-Way Shut-Off, 1/2 in. Female Pipe Thread Brand: Foster Manufacturing | *$41.60 |
 | IMPERIAL 97368 QUICK DISCONNECT COUPLER 1/2x3/8FNPT - TRU FLATE DESIGN Brand: Imperial Model: 97368 Part Number: 97368 "IMPERIAL" QUICK DISCONNECT COUPLER
Body Style: 1/2"
Female NPT: 3/8"
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air.
Body Female Pipe Thread, Industrial or Automotive (Tru-Flate) Design. | *$41.59 |
| | IMPERIAL 90921 REPLACEMENT MALE ELBOW FITTING 5/1624" (PACK OF 5) Brand: Imperial Model: 90921 Part Number: 90921 "IMPERIAL" MALE ELBOW FITTING
Replacement Male Elbow Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Size: 1/8"
Thread Size: 5/1624"
Pipe Thread: 1/8"
Cross Reference: 284 x 2 | *$41.35 |
| | IMPERIAL 99454 FLAT FACE O-RING STRAIGHT THREAD CONNECTOR FITTING 1"X1"(PACK OF 2) Brand: Imperial Model: 99454 Part Number: 99454 IMPERIAL" FLAT FACE O-RING MALE ADAPTOR
Port Thread: 1"
Material: 12L14 steel.
Sealing Method: O-ring.
Cross Reference: 4315 x 16
Tube Outside Diameter: 1"
Vibration: Excellent resistance.
For-Seal Thread Size: 1-7/1612
Pressure: Operating pressure to 6,000 psi
Typical Application: High pressure hydraulic, pneumatic, and chemical processing. | *$41.29 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 5in. Bore, 36in. Stroke, Model# 50TL36-200 Brand: Lion 2500 Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 5, Stroke Length (in.): 36, Closed Pin Center (in.): 48 1/4, Shaft Diameter (in.): 2 | *$409.99 |
 | Enerpac Hydraulic Power Workholding Sequence Valve For Time Interval Control No. WVP-5 (1 Each) Brand: Reid Supply Company Part Number: WVP-5 These valves can be plumbed to provide a sequence of clamping functions from just one hydraulic power source. Sequenced locating, clamping, and/or supporting functions can be controlled in a logical order by plumbing one sequence valve to each clamping group requiring a different time interval. The valve can be preset to different pressure values, allowing fluid flow in sequence as the hydraulic pressure increases in the entire system to whatever the power source provides, after all valves are open. These valves are basically timers, not pressure controllers. The VE-211 features a lock nut which secures the hydraulic pressure setting for the secondary circuit and a tamper proof cover can be placed over the set screw. Maximum operating pressure is 5,000 psi." | *$406.00 |
 | Westward 3ZC69 Ram System, 10 Ton Brand: WestWard Tools Hydraulic Ram System, Capacity 10 Tons, Stroke 6 Inches, 4 Extension Tube Sizes, Complete Kit with Pump Ram and Accessories | *$401.85 |
 | 21254 Hydraulic Oil (277-HF-101) Category: Hydraulic Oils Brand: Enerpac Item #: 277-HF-101. Maximum pump volumetric efficiencybrMaximum internal heat transferbrPrevents pump cavitationbrAdditives prevent rust, oxidation and sludgebrHigh viscosity indexbrMaximum film protective lubricity pulliCapacity Volume = 1 galliFlash Point = 400.00 øFliPour Point = -25.0 øFliWt. = 8 lb/ul brCustomers also search for: Discount 21254 Hydraulic Oil, Buy 21254 Hydraulic Oil, Wholesale 21254 Hydraulic Oil, 662005212545, HF-101, Hydraulic Oils | *$40.49 |
 | FFS06-06 , Hydraulic Flush Face Socket, 2-Way Shut-Off, 3/8 in. Female Pipe Thread Brand: Foster Manufacturing | *$40.00 |
 | H6B , FHK Series Hydraulic, Brass Socket, 3/4 in. Female Pipe Brand: Foster Manufacturing | *$40.00 |