 | Reusable Hydraulic JIC 37 Deg. Female, Long 90 Deg. Elbow, Thread Size 1·5/16-12"
Brand: IWS
Reusable Hydraulic JIC 37 Deg. Female, Long 90 Deg. Elbow, Thread Size 1·5/16-12", Hose ID 7/8", Drop Length 4.58", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$88.43 |
 | 80353 Handpump w/5t 5" C (277-SCR-55H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCR-55H
Item #: 277-SCR-55H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 5 tons [Max]liCylinder Stroke = 5.000 inliCollapsed Height = 8 1/2 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RC-55 Cylinder, P-142 Hand Pump, HC-7206 Hose, GP-10S Gauge, GA-4 Gauge AdaptorliQuantity = 5 per setliWt. = 16.80 lb/ul brCustomers also search for: Discount 80353 Handpump w/5t 5" C, Buy 80353 Handpump w/5t 5" C, Wholesale 80353 Handpump w/5t 5" C, 662005803538, SCR-55H, Hydraulic Sets | *$876.46 |
 | Udor RO 70/GR-5
Brand: justudorpumps.com Model: jup_RO-70_GR-5 Part Number: jup_RO-70_GR-5
The Udor RO 70/GR-5 is a 2-diaphragm pump with universal drive face and pulsation dampener. It is fitted with a gear reduction for use with 5HP to 6.5HP gas engines with 3/4" shafts. These Udor pumps are perfect for a range of horticultural and agricultural spraying applications, as well as for lawn and turf care spraying applications such as pest control. | *$873.51 |
 | Watts Water Technologies P-10PORT Preassembled PEX Manifold
Brand: Watts Water Technologies Part Number: P-10PORT
Watts manifolds operate much like an electrical breaker box. The main water supply lines bring water into the manifold and individual distribution lines move water out to each fixture. All outlets have a built in valve which allows you the ability to stop the water flow to any single fixture without shutting down the entire water system. The Watts manifold system utilizes an exclusive modular design. manifold sections can be expanded using additional stem bodies. No. P 10PORT: 10 port No. P 20PORT: 20 port | *$87.56 |
 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 24"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 24" | *$87.35 |
 | IMPERIAL 192031 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M12x8MM (PACK OF 5)
Brand: Imperial Model: 192031 Part Number: 192031
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube X M12 X 1.5 metric thread - male connector. | *$85.99 |
 | 1/4 NPT Port, 10-32 Pilot Port, Parker Blocking Valves w/Threaded Connection (1 Each)
Brand: Reid Supply Company Part Number: MFP-488
Blocking Valves w/Threaded Connection - Blocking valves are designed for precise repeatable stopping of moving cylinders or to maintain the position of a cylinder in the event of an air pilot signal loss. Blockers are used for positioning, jogging, and safety purposes. Operating pressure is 0 -150 psi with a temperature range of 5°F to 140°F. Maximum operating frequency is 10 Hz with a life expectancy of 10 million cycles at 90 psi, 68°F, dry air and 1 Hz operating frequency. | *$85.69 |
 | 3/4 NPT, Parker Lubricators (1 Each)
Brand: Reid Supply Company Part Number: MFP-363
Lubricators - These lubricators are designed to provide optimum and uniform lubrication with fine micro-mist particles of two micron or smaller. Units should be installed close to the application, ensuring effective distribution of oil to pneumatic components. All units have a polycarbonate bowl. Metal bowl guards sold separately. Maximum pressure is 150 psi and temperature range of 32°F to 125°F. | *$85.03 |
 | JIC (AN) Cap Plug Kit
Brand: RHI Model: F505304 Part Number: F505304
Kit contains:
#4 - 4 each cap and plug
#5 - 2 each cap and plug
#6 - 4 each cap and plug
#8 - 4 each cap and plug
#10 - 4 each cap and plug
#12 - 4 each cap and plug
#16 - 4 each cap and plug | *$85.00 |
 | Udor Kappa 43/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-43_GR Part Number: jup_Kappa-43_GR
The Udor Kappa 43/GR pump is a 3-diaphragm pump with control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. The 43/GR is fitted with a gearbox for 4 HP to 6.5 HP gas engines with 3/4" shafts. Use the Udor Kappa 43/GR pump for agricultural and horticultural spraying applications, along with lawn and turf care spraying applications such as pest control. | *$847.72 |
 | Hydraulic Hand Foot Pumps Model Code: AA (part# 755)
Brand: Greenlee Part Number: 755
755 Model Code: AA (part# 755) Hydraulic Foot Pump High Pressure Hydraulic Hand Pump Hydraulic Hand Pump This item features: -Foot activated release lever. -Hold-down pin keeps pedal down for storage and transport. -Angles based bar keeps the pump upright and stable. -Portable and powerful for use with Geenlee Benders. -Operates in any position. -Steel pump body and handle with rubber grip. -Mounting holes for permanent positioning. -Lightweight and portable for use with Greenlee Punch Drivers. -Steel pump body/reservoir with cast aluminum handle. -Price is for 1 Each. Model Code  Model Description AANo. of Speeds:1, Operating Pressure:10000.0 psi [Max], Outlet Size:3/8 in, Length:25 1/2 in, Width:7 in, Height:6 in, Drive Type:Lever Action, Includes:3/8 in. Female Hydraulic Connector, Dust Cap, Designated Fluid:Hydraulic Oil, Type:Hydraulic Hand Pump, Vol. @ No. of Strokes:0.161 cu in @ 1 ABNo. of Speeds:1, Operating Pressure:6500.0 psi [Max], Drive Type:Lever Action, Designated Fluid:Hydraulic Oil ACOperating Pressure:6500.0 psi [Max], Includes:1/4 in. Female Coupler, Dust Cap | *$845.84 |
 | Brand Hydraulics Spring Centered Work Section, Model# 20BFT4SB
Brand: Brand Hydraulics
This Brand Hydraulics work section has a 4-way, 3-position tandem center. U.S.A. | *$84.99 |
 | Lion Tie-Rod Cylinder - 2500 PSI, 2in.Bore, 8in. Stroke, 1 1/8in. Shaft, Model# 20TL08-112 ASAE
Brand: Lion 2500
Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision-ground, polished and hard chrome-plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 2, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8 | *$84.99 |
 | Adjustable Flow Control Valve - 3/4in. Port Size
Brand: Prince
Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-30 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. | *$84.99 |
 | Adjustable Flow Control Valve - 1/2in. Port Size
Brand: Prince
Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-16 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. | *$84.99 |
 | IMPERIAL 97460 FLUSH FACE HYDRAULIC QUICK COUPLER 3/8" - STEEL
Brand: Imperial Model: 97460 Part Number: 97460
"IMPERIAL" DOUBLE SHUT-OFF HYDRAULIC COUPLER
Seals are made of nitrile.
3000 PSI.
Body Size: 3/8.
Steel Construction.
Female Thread: 3/8. NPTF.
Tomco No.: EC3-21.
Parker No.: FF371-6FP.
Aeroquip No.: FD49-1001-06-06.
Temperature Range: -40° to 225° F.
Referred to as "Dry Seal" type quick couplers.
Heavily plated steel construction.
Shut-off valves in the nipple and coupler.
Conforms to all the requirements of ANSI/HTMA.
Face-guide is designed to simplify hook-up without slip-off.
International interchangeability in application requiring no fluid loss.
Can be used with Flush Face Double Shut-Off Hydraulic Coupler Nipple, Part No. 97461. | *$84.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1/2-20 thds., Stroke=.219 (1 Each)
Brand: De-Sta-Co Part Number: 010-210-400
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$84.70 |
 | NorTrac Heavy-Duty Hydraulic Cylinder - 2500 PSI, 3/4-16 UNF Port, 12in. Stroke
Brand: NorTrac
This NorTrac cylinder is an ideal choice for agricultural and industrial applications. It is designed to withstand shock loads of up to 5000 PSI and features durable ductile iron cast components and 90 durometer O-ring seals with anti-extrusion rings that provide positive sealing throughout the cylinder. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 12, Closed Pin Center (in.): 20, Shaft Diameter (in.): 1 1/2 | *$84.00 |
 | Kodiak 2" Semi Trash Pump with Honda GX120 OHV Engine
Brand: enginepoweredpumps.com Model: epp_PWP2SST Part Number: epp_PWP2SST
The Kodiak 2" Semi Trash Pump unites with a 4.0 HP Honda GX120 OHV engine to provide superior performance when dealing with the transferring of mud and sand. This mud and sand transfer pump is perfect for slurries and solids up to 3/4" in diameter. This semi trash pump features an oil alert feature and a cast iron impeller and volute. | *$839.97 |
 | Udor Kappa 33/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-33_GR Part Number: jup_Kappa-33_GR
The Udor Kappa 33/GR pump is a 3-diaphragm pump with control unit with pressure regulator that's adjustable, manual dump lever, dual ball valve outlets and pressure gauge. The 33/GR pump by Udor is fitted with a gearbox for 4HP to 6.5HP gas engines with 3/4" shafts. These Udor Kappa 33 pumps are ideal for a range of horticultural and agricultural spraying applications, as well as for lawn and turf care applications such as pest control. | *$839.54 |
 | Udor Kappa 30 with Gearbox and Control Unit
Brand: justudorpumps.com Model: jup_Kappa-30_GRHR Part Number: jup_Kappa-30_GRHR
The Udor Kappa 30GRHR is a Kappa 30 pump with control unit and gear reduction for 4HP to 6.5HP gas engines with 3/4" shafts. Udor Kappa 30 pumps are excellent for a range of horticultural and agricultural spraying applications, as well as for lawn and turf care applications such as pest control. Use this pump with liquid fertilizers and abrasive materials to meet all of your spraying needs. | *$836.82 |
| SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 60"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 60" | *$83.33 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-122, Use w/cap.=2,600 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-122
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$83.00 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-971ST (1 Each)
Brand: Enerpac Part Number: TS-971ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$83.00 |
 | Udor RO 110 Pump
Brand: justudorpumps.com Model: jup_RO-110 Part Number: jup_RO-110
The Udor RO 110 Pump is a 3-diaphragm pump with universal drive face, pulsation dampener and mounting rails. These Udor RO pumps are ideal for a range of horticultural and agricultural spraying applications, and also for lawn and turf care spraying applications such as pest control. | *$826.97 |
| IMPERIAL 192030 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M10x8MM (PACK OF 5)
Brand: Imperial Model: 192030 Part Number: 192030
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube X M10 X 1.0 metric thread - male connector. | *$82.99 |
 | IMPERIAL 92363 "90-SERIES" FEMALE JIC SWIVEL FITTING 1/4x5/16 (PACK OF 5)
Brand: Imperial Model: 92363 Part Number: 92363
"IMPERIAL" FEMALE JIC SWIVEL FITTING
Tube Size: 5/16
Universal fit - 37° and 45°.
Hose Inside Diameter: 1/4
Thread Size: 1/2 20
Cut-Off Factor: 1-3/32
Cross Reference: 20690-5-5
Reusable 90-Series Female JIC Swivel Fitting for Teflon® Hose. | *$82.59 |
 | Udor Gear Reduction Kit
Brand: justudorpumps.com Model: jup_5034_B5 Part Number: jup_5034_B5
The Udor 16 HP to 20 HP Gear Reduction Kit is compatible with your Udor Kappa 100 and 120 pumps. These gear reduction kits are black anodized, bearing supported and vented for longevity. | *$813.12 |
 | ANCHOR BRAND B24000 BRASS REPLACEMENT GAUGE 2" (PACK OF10)
Brand: Anchor Model: B24000 Part Number: B24000
"ANCHOR BRAND" BRASS REPLACEMENT GAUGE
Type: Replacement Gauge
Diam: 2 in
Thread Size: 1/4 in (NPT)
Pressure: 400.00 psi
Case Material: Brass
One-piece threaded polycarbonate lens
Cupped aluminum dial with white background and red and/or black markings. | *$81.99 |
 | 3/8 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 19. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-213
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$81.69 |
 | 2. Bore x 3. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-29
Front Nose Mount - Double Acting | *$81.13 |
 | Udor Kappa 18/12
Brand: justudorpumps.com Model: jup_Kappa_18_12 Part Number: jup_Kappa_18_12
The Udor Kappa 18/12 is an electric 12 Volt diaphragm pump that is mainly used in commercial landscaping weed spray and other lawn care spraying applications. This heavy-duty commercial pump can supply 1 spray wand and still maintain pressure.
Note: a relief valve (not included) is needed to operate the Udor 18/12 pump safely. Also, if the oil in the oil sight glass on the side of your pump is milky grey in color, it is time to change the main diaphragms because the oil is mized with spray. Do not run pump with mixed oil, as this will shorten the pump's life. Consider purchasing a repair kit for your Udor diaphragm pump so it is on hand just in case your diaphragms fail. | *$802.77 |
| Udor RO 110/C Pump
Brand: justudorpumps.com Model: jup_RO-110_C Part Number: jup_RO-110_C
This Udor RO 110/C Pump is a 3-diaphragm pump with pulsation dampener, mounting rails and a 1 3/8", 6-spline male PTO shaft. These Udor RO pumps are ideal for a range of horticultural and agricultural spraying applications, and also for lawn and turf care spraying applications such as pest control. | *$802.32 |
 | IMPERIAL 97404 HYDRAULIC QUICK COUPLER 3/4"
Brand: Imperial Model: 97404 Part Number: 97404
"IMPERIAL" HYDRAULIC QUICK COUPLER
Body Size: 3/4"
PSI: 2,500 lbs.
Cross Reference: H6-63
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 3/4ndash14;
Temperature Range: -40° F. to 250° F.
Can be used with Hydraulic Quick Coupler Nipple, Part No. 97414
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$80.69 |
 | 3/8 NPT Ports, 1 1/2 Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-15
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$80.38 |
| 1/2 NPT Ports, 1 1/2 Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-16
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$80.38 |
 | Breather Cap - 3in. Dia.
Brand: Northern Tool Equipment
Ventilators filter particles as small as 40 microns. U.S.A. | *$8.99 |
 | Apache Hydraulic Hose - 1/4in. x 12in.L, 1-Wire, 3000 PSI
Brand: Universal
This Apache hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. | *$8.99 |
 | Apache Reusable Hose Coupling - 1 Wire, Male Pipe, 1/2in.
Brand: Apache Hose
This Apache reusable hose coupling is male pipe NPTF. Fitting Size (in.): 1/2, Wire: 1 | *$8.99 |
 | Apache Forged Brass Hydraulic Valve - 600 PSI, 1/2in.
Brand: Apache Hose
This Apache bolt type hydraulic valve has 600 PSI working pressure. Chrome-plated ball and blow-out proof stem. Reinforced glass fiber-filled PTFE seats provide bubble tight resilient sealing and NPTF screwed ends. Allows uniform flow in either direction with a quick quarter turn. Port Size (in.): 1/2, Max. PSI: 600 | *$8.99 |
 | Apache Female Thread (37 JIC Swivel) Coupling - 3/8in., 1 Wire
Brand: Apache Hose
This Apache reusable fitting is designed for female SAE 37 applications. Couples into hose like male pipe NPTF fittings. Female thread on both ends. Fitting Size (in.): 3/8, Wire: 1 | *$8.99 |
 | IMPERIAL 97365 QUICK DISCONNECT COUPLER PLUG 1/4"x1/4"FNPT - LINCOLN DESIGN (PACK OF 2)
Brand: Imperial Model: 97365 Part Number: 97365
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Female NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Lincoln Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$8.99 |
 | IMPERIAL 97363 QUICK DISCONNECT COUPLER PLUG 3/8X3/8FNPT(PACK OF 2)
Brand: Imperial Model: 97363 Part Number: 97363
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 3/8"
Female NPT: 3/8"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$8.99 |
 | IMPERIAL 99494 FOR-SEAL O-RING FOR FLAT FACE O-RING FITTING 3/4
Brand: Imperial Model: 99494 Part Number: 99494
"IMPERIAL" FOR-SEAL O-RING
Tube Outside Diameter: 3/4
Cross Reference: 4629 x 12
Excellent vibration resistance.
Fitting Sealing Method: O-Ring.
Quantity: 10 per pack.
Material: Buna N 90 Durometer.
Maximum operating pressure to 6,000 psi.
For-Seal O-Ring for Flat Face O-Ring Fitting.
Temperature Range: -40° F. to 250° F. (-40° C. to 121° C.)
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$8.99 |
| | IMPERIAL 99440 FLAT FACE STRAIGHT THREAD O-RING CONNECTOR FITTING 1/4X1/4(PACK OF 2)
Brand: Imperial Model: 99440 Part Number: 99440
"IMPERIAL" O-RING CONNECTOR FITTING
Tube Size: 1/4
Port Thread: 1/4
Material: 12L14 steel.
Sealing Method: O-ring
Vibration: Excellent resistance
For-Seal Thread Size: 9/16 - 18
Pressure: Operating pressure to 6,000 psi
Typical Application: High pressure hydraulic, pneumatic, and chemical processing. | *$8.99 |
| | IMPERIAL 99443 FLAT FACE O-RING STRAIGHT THREAD CONNECTOR FITTING 3/8X3/8(PACK OF 2)
Brand: Imperial Model: 99443 Part Number: 99443
"IMPERIAL" FLAT FACE O-RING MALE ADAPTOR
Port Thread: 3/8
Cross Reference: 4315 x 6
Sealing Method: O-Ring
Material: 12L14 steel
Tube Outside Diameter: 3/8
For-Seal Thread Size: 11/1616
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing.
Flat Face O-Ring Straight Thread O-Ring Connector Fitting (Reference SAE No. 520120). | *$8.99 |
| IMPERIAL 97377 QUICK DISCONNECT COUPLER PLUG 1/4"x3/8"FNPT (PACK OF 2)
Brand: Imperial Model: 97377 Part Number: 97377
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Female NPT: 3/8"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$8.99 |
 | IMPERIAL 97744 "SERIES 320" HIGH FLOW COUPLER PLUG 3/8"NPT-FEMALE
Brand: Imperial Model: 97744 Part Number: 97744
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Size: 1/4"
Female NPT: 3/8"
High flow design.
Flow Capacity: 74.3 CFM
Material: brass/steel.
Plating: Nickel
Coupler Plug Female Pipe Thread.
Maximum Working Pressure: 232 psi (16 bar)
Minimum Burst Pressure: 2030 psi (140 bar)
Male threads come with preapplied thread sealant.
Heavy-duty quick disconnect coupler plugs high flow series 320
Not interchangeable with any other system or design of couplers. | *$8.99 |
 | Mastercool 85530 3-IN-1 Side Mount Can Tap Valve
Brand: MasterCool Model: MSC85530 Part Number: 85530
Refrigerant Can Tap R-12, R-134A Oil Charge Brass fitting with 1/4" flare fitting 1/2" acme fitting. | *$8.96 |
 | K4S , FHK Series Hydraulic, Steel Plug, 1/2 in. Female Pipe
Brand: Foster Manufacturing | *$8.96 |
