 | Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 18in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 18, Closed Pin Center (in.): 30 1/4, Shaft Diameter (in.): 2 | *$349.99 |
 | Astro Pneumatic (ASTTS22) 20 Ton Capacity Hydraulic Press
Brand: Astro Pneumatic Part Number: TS22
pstrongFeatures and Benefits:/strong/pul liHeavy duty return springs for fast ram retraction/li liReinforced head plate/li liArbor plates included/li liSafety bypass valve assures unit will not exceed rated capacity/li liSafe and durable/li/ulpOverall height: 59-3/8"; base width: 26-3/8"; hydraulic stroke: 5-3/4"; press bed width: 22-1/2" x 4. Meets ANSI standard for performance and safety./p | *$349.99 |
 | Dynamic Fluid Components Hi/Lo Hydraulic Gear Pump - 16 GPM, 2-Stage, Model# GP-CBN-160-P-C
Brand: Dynamic
The Dynamic Fluid Components hi/lo hydraulic gear pump provides max. pressure of 900 PSI for low pressure and 3000 PSI for high pressure, making it an ideal choice for log splitters, presses and similar equipment requiring rapid movement of the cylinder at low pressure prior to switching to the high pressure mode to meet load requirements. Max. PSI: 900/3,000, Shaft Diameter (in.): 1/2, GPM: 16, Stage: 2, Rotations Per Minute: 3,600 | *$345.99 |
 | Hydraulic-Equipment - 10 Ton Cylinder, S/A
Brand: Enerpac Model: ENERPAC Part Number: RC-101
Hydraulic-Equipment - 10 Ton Cylinder, S/A | *$340.99 |
 | 3/4 Bore x 2. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-67
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$34.83 |
 | 1/2 NPT Port, 85.3 SCFM Flow, ARO Needle Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-390
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$34.81 |
 | Silicone Coolant Hose, 23/8"
Brand: IWS
Silicone Coolant Hose, 2-3/8" ID x 2.75 OD, Working Pressure 40 PSI, 4 Feet Per Case | *$34.80 |
| | Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 1-1/16-14"
Brand: IWS
Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 1·1/16-14", Hose ID 5/8" | *$34.80 |
| | IMPERIAL 99469 FLAT FACE STRAIGHT THREAD O-RING 90° ELBOW FITTING 1/4X3/8(PACK OF 2)
Brand: Imperial Model: 99469 Part Number: 99469
"IMPERIAL" O-RING 90° ELBOW FITTING
Port Size: 3/8"
Material: 12L14 steel.
Sealing Method: O-Ring.
Tube Outside Diameter: 1/4"
Cross Reference: 4515x4x6
Excellent vibration resistance.
Maximum operating presure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$34.79 |
 | Ring Style Turbo-Sleeve
Brand: IWS
Ring Style Turbo-Sleeve, 3-1/2" ID, 6'' Long | *$34.51 |
 | Reusable Hydraulic Male Inverted 45 Degree Elbow Coupling, Thread Size 1/2-20
Brand: IWS
Reusable Hydraulic Male Inverted 45 Degree Elbow Coupling, Thread Size 1/2-20", Hose ID 1/4", Drop Length 0.36", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 0 Per Case | *$34.51 |
 | 1 1/2 Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-210
1-1/2" Bore Stud Mount Double Acting | *$34.41 |
 | 3/8 NPT, 3/8 Tube SizeParker Right Angle Flow Controls w/Presto Lock Fittings (1 Each)
Brand: Reid Supply Company Part Number: MFP-328
Right Angle Flow Controls with Presto Lock Fittings | *$34.37 |
 | 1 1/4 Bore x 2. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-175
1-1/4" Bore Stud Mount Double Acting | *$34.34 |
 | SAE Ball Sleeve Teflon Reusable Fitting
Brand: IWS
SAE Ball Sleeve Teflon Reusable Fitting, Thread 13/16-18, Hose ID 1/2" | *$34.22 |
 | 1/4 NPT, Parker Lubricators (1 Each)
Brand: Reid Supply Company Part Number: MFP-360
Lubricators - These lubricators are designed to provide optimum and uniform lubrication with fine micro-mist particles of two micron or smaller. Units should be installed close to the application, ensuring effective distribution of oil to pneumatic components. All units have a polycarbonate bowl. Metal bowl guards sold separately. Maximum pressure is 150 psi and temperature range of 32°F to 125°F. | *$34.16 |
 | 3/8 NPT Ports, 1/2 NPT Inlet, 10 Port, 1.50 W x 15.25 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-530
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$34.05 |
 | Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1-1/4-11-1/2
Brand: IWS
Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1-1/4-11-1/2", Hose ID 1-1/8", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 1 Per Case | *$34.02 |
 | Enerpac Hydraulic Power Workholding Jam Nut No. JN-12, 1 7/8-16 (1 Each)
Brand: Enerpac Part Number: FN-481 | *$34.00 |
 | 20 Ton Air Floor Hydraulic Shop Press
Brand: ToolShopUSA
-Useful For: Straightening, Bending And Pressing,
Removing And Installing Gears, Bearings And Bushes
-"H" Type Structural Steel Frame, With High Stability,
Can Be Dismounted For Storage Or Transportation
Height Limit Valve
-When Piston Rod Reaches Its Limit It Stops Automatically Pump Can Be Operated By Hand Or With Air
Pro-Line Trading Corp.
1706 Potrero Ave.
South El Monte, CA 91733 | *$339.99 |
 | Flow Meter With Thermometer
Brand: Northern Tool Equipment
Handles up to 32 GPM at 6000 PSI. Includes 180deg F thermometer. Otherwise, similar to #2048. | *$339.99 |
 | Hammerlok Coupling Links Model Code: AB - Price is for 1 Each (part# 664028)
Brand: Columbus McKinnon Model: 664028 Part Number: 664028
664028 Model Code: AB - Price is for 1 Each (part# 664028) This item features: -Also used for installing new body chain in used slings. -Attaches chain to masterlinks and eye type hooks. -Permits fast assembly. -Material: Steel. Model Code  Model Description AAChain Size:1/2 in, Working Load Limit:12000 lb, Color:Black, Locking Type:Folding Link, Wire Diam:1/2 in ABChain Size:1/4 in, Working Load Limit:3500 lb, Color:Black, Locking Type:Folding Link ACChain Size:3/4 in, Working Load Limit:28300 lb, Color:Black, Locking Type:Folding Link, Wire Diam:3/4 in ADChain Size:3/8 in, Working Load Limit:7100 lb, Type:Folding Link AEChain Size:5/8 in, Working Load Limit:18100 lb, Color:Black, Locking Type:Folding Link, Wire Diam:5/8 in | *$33.99 |
 | IMPERIAL 97457 DOUBLE SHUT-OFF HYDRAULIC COUPLER NIPPLE 3/4"
Brand: Imperial Model: 97457 Part Number: 97457
"IMPERIAL" HYDRAULIC COUPLER NIPPLE
Body Size: 3/4"
Female Thread: 3/4 NPTF
Tomco No.: PA5606-31
Parker No.: 6602-12-12
Aeroquip No.: 5602-12-12S
Double Shut-Off (ISO "A") Quick Coupler Nipple.
Shut-off valves on the nipple and coupler.
Interchangeability with other leading manufacturers.
Rated at a working pressure of 4,000 psi.
Temperature Range: -40° to 225° F.
Seals are made of Buna-N material.
Exceeds ISO 7241-1, series "A" specifications.
Hose protection is the result of swivel action allowed by the coupler.
Used with Double Shut-Off (ISO "A") Quick Coupler, Part No. #97456
Positive alignment and even load distribution provided by the ball-locking mechanism. | *$33.89 |
 | Air Brake Compression Union Elbow, 3/4" tube size
Brand: IWS
Air Brake Compression Union Elbow, 3/4" tube size | *$33.82 |
 | IMPERIAL 97401 HYDRAULIC QUICK COUPLER 1/4"
Brand: Imperial Model: 97401 Part Number: 97401
"IMPERIAL" HYDRAULIC QUICK COUPLER
Body Size: 1/4"
PSI: 5,000 lbs.
Cross Reference: H2-62
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 1/4ndash18;
Temperature Range: -40° F. to 250° F.
Can be used with Hydraulic Quick Coupler Nipple, Part No. 97411
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$33.65 |
| Silicone Coolant Hose, 21/4"
Brand: IWS
Silicone Coolant Hose, 2-1/4" ID x 2.62" OD, Working Pressure 40 PSI, 4 Feet Per Case | *$33.53 |
 | IMPERIAL 97736 "SERIES 320" QUICK DISCONNECT COUPLER 1/2"MNPT - HIGH FLOW
Brand: Imperial Model: 97736 Part Number: 97736
"IMPERIAL" QUICK DISCONNECT COUPLER
Body Size: 1/4"
Male NPT: 1/2"
High flow design.
Material: brass/steel.
Plating: Nickel
Flow Capacity: 74.3 CFM
Coupler Body Male Pipe Thread.
Maximum Working Pressure: 232 psi (16 bar)
Minimum Burst Pressure: 2030 psi (140 bar)
Male threads come with preapplied thread sealant.
Not interchangeable with any other system or design of couplers.
Heavy-duty quick disconnect couplers high flow series 320 | *$33.49 |
 | IMPERIAL 97739 "SERIES 320" QUICK DISCONNECT COUPLER 1/2"FM NPT - HIGH FLOW
Brand: Imperial Model: 97739 Part Number: 97739
"IMPERIAL" QUICK DISCONNECT COUPLER
Body Size: 1/4"
Female NPT: 1/2"
High flow design.
Material: brass/steel.
Plating: Nickel
Flow Capacity: 74.3 CFM
Coupler Body female Pipe Thread.
Maximum Working Pressure: 232 psi (16 bar)
Minimum Burst Pressure: 2030 psi (140 bar)
Male threads come with preapplied thread sealant.
Heavy-duty quick disconnect couplers high flow series 320
Not interchangeable with any other system or design of couplers. | *$33.49 |
| Ring Style Turbo-Sleeve
Brand: IWS
Ring Style Turbo-Sleeve, 4" ID, 6'' Long | *$33.43 |
 | Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 7/8-14"
Brand: IWS
Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 7/8-14"Hose ID 1/2", Drop Length 2.57"Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$33.33 |
 | 1/4 NPT, Parker Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-364
Regulators with Gauge - These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures. Pressure range is 2-125 psi and temperature range is 32°F to 125°F. | *$33.26 |
 | IMPERIAL 97414 HYDRAULIC QUICK COUPLER NIPPLE 3/4"
Brand: Imperial Model: 97414 Part Number: 97414
"IMPERIAL" HYDRAULIC QUICK COUPLER NIPPLE
Body Size: 3/4"
PSI: 2,500 lbs.
Cross Reference: H6-63
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 3/4"ndash14;
Temperature Range: -40° F. to 250° F.
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
Can be used with Hydraulic Quick Coupler Nipple, Part No. 97401
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$33.19 |
 | Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 3/4-16"
Brand: IWS
Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 3/4-16", Hose ID 13/32", Drop Length 1.09", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 10 Per Pack | *$33.14 |
 | Haldex 12 Volt DC Power Unit - Manual Operation, Single Acting, Model# 1261033
Brand: Haldex
The Haldex 12V DC power unit is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. U.S.A. Flow (GPM): 1.4 GPM at 1,600 PSI, Reservoir Capacity: 3 qt., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, Volts: 12 DC | *$329.99 |
 | Haldex Hydraulic Pump - 22 GPM, 2-Stage, Model# 1080035
Brand: Haldex
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. | *$329.99 |
 | Porto-Power 10-Ton Pump - 200-10,000 PSI
Brand: Porto-Power
Lightweight and compact pump has aluminum pump head for maximum corrosion resistance. 2-speed operation reduces handle strokes. Noncorrosive fiberglass handle for operator safety. Lower handle effort minimizes operator fatigue while handle lock allows for easy carrying. Internal pressure relief valve for overload protection. Max. PSI: 10,000, Material: Aluminum | *$329.99 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 5in. Bore, 18in. Stroke, Model# 50TL18-200
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High -tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 5, Stroke Length (in.): 18, Closed Pin Center (in.): 30 1/4, Shaft Diameter (in.): 2 | *$329.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2in. Bore, 16in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 2 | *$329.99 |
 | Reliance/Added Sales 6-50-DOLS Reliance 606 Features
Brand: Reliance Part Number: 6-50-DOLS
Compliant with requirements based on the National Appliance Energy Conservation Act (NAECA) that became effective on 1 19 04. 6 Year Tank Warranty6 Year Parts WarrantyGlass Lined TankConvenient Temperature ControlTwo 4500W Elements, 240VR Value 16.002'' Foam InsulationAlmond Jacket with Almond TrimLow boy Series are Top Plumbed 3 4'' Inlet OutletTemperature and Pressure Relief Valve Installed3 4'' F.I.P.S. inlet end outlet located on top of heater {text} %Units manufactured in 1999 and 2000 use a special 1 3 8'' diameter element model No. 9002442TR. | *$327.29 |
| | IMPERIAL 99401 FLAT FACE O-RING CAP FITTING 3/8(PACK OF 5)
Brand: Imperial Model: 99401 Part Number: 99401
"IMPERIAL" O-RING CAP FITTING
Tube Outside Diameter: 3/8
For-Seal Thread Size: 11/1616
Cross Reference: 4129 x 6
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Cap Fitting (Reference SAE No. 520112).
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$32.89 |
| | IMPERIAL 99473 FLAT FACE STRAIGHT THREAD O-RING 90° ELBOW FITTING 1/2X1/2(PACK OF 2)
Brand: Imperial Model: 99473 Part Number: 99473
"IMPERIAL" O-RING 90° ELBOW FITTING
Port Thread: 1/2"
Material: 12L14 steel.
Sealing Method: O-Ring.
Tube Outside Diameter: 1/2"
For-Seal Thread Size: 13/1616
Cross Reference: 4515 x 8
Excellent vibration resistance.
Maximum operating presure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing.
Flat Face O-Ring Straight Thread O-Ring 90° Elbow Fitting (Reference SAE No. 520220). | *$32.89 |
| | IMPERIAL 99472 FLAT FACE STRAIGHT THREAD O-RING 90° ELBOW FITTING 3/8X1/2(PACK OF 2)
Brand: Imperial Model: 99472 Part Number: 99472
"IMPERIAL" O-RING 90° ELBOW FITTING
Port Thread: 1/2"
Material: 12L14 steel.
Sealing Method: O-Ring.
Tube Outside Diameter: 3/8"
For-Seal Thread Size: 11/1616
Cross Reference: 4515 x 6 x 8
Excellent vibration resistance.
Maximum operating presure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing.
Flat Face O-Ring Straight Thread O-Ring 90° Elbow Fitting (Reference SAE No. 520220). | *$32.79 |
| | IMPERIAL 99412 FLAT FACE O-RING PLUG FITTING 1/2(PACK OF 5)
Brand: Imperial Model: 99412 Part Number: 99412
"IMPERIAL" O-RING PLUG FITTING
Tube Outside Diameter: 1/2
For-Seal Thread Size: 13/1616
Cross Reference: 4229 x 8
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Plug Fitting (Reference SAE No. 520109)
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$32.59 |
| 3/4 Bore x 1. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-66
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$32.57 |
| Silicone Coolant Hose, 21/8"
Brand: IWS
Silicone Coolant Hose, 2-1/8" ID x 2.5 OD, Working Pressure 50 PSI, 4 Feet Per Case | *$32.45 |
| Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 1/2-20"
Brand: IWS
Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 1/2-20"Hose ID 1/4", Drop Length 1.77"Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$32.45 |
 | 1/8 NPT, 8.8 SCFM Flow, Parker Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-308
Needle, Check and Flow Control Valves | *$32.27 |
| 1 1/4 Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-170
1-1/4" Bore Stud Mount Double Acting | *$32.04 |
 | Flow Meter
Brand: Northern Tool Equipment
Will handle up to 30 GPM at 5000 PSI. 4% FDS accuracy. Large 2 1/2in. direct read dial. Can be mounted horizontal or vertical. 3/4in. in and out ports. Comes with 1/4in. port to mount pressure gauge. Use on pressure or return line. Measures in GPM. | *$319.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 36in. Stroke, 2in. Shaft, Model# PMC-5636
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 36, Closed Pin Center (in.): 45, Shaft Diameter (in.): 2 | *$319.99 |
|
