 | Northman Fluid Power In-Line Hydraulic Relief Valve - 50 GPM, 1000-3550 PSI Adjustable, 3550 PSI, 3/4in. NPT Ports, Model# RFT063 Brand: Northman Fluid Power This Northman adjustable relief valve is designed to limit the operating pressure in a hydraulic system to a maximum set pressure. The valve may be connected into the pressure line so that system pressure flows through, or it may be teed off the pressure line with one of the pressure ports plugged. When the system reaches the maximum desired setting, the internal piston moves to smoothly relieve pressure to tank, maintaining stable pressure control and repeatability. Ports are also provided for a gauge and for remote pressure control. | *$89.99 |
 | Northman Fluid Power In-Line Hydraulic Relief Valve - 50 GPM, 500-2000 PSI Adjustable, 3550 PSI, 3/4in. NPT Ports, Model# RFT062 Brand: Northman Fluid Power This Northman adjustable relief valve is designed to limit the operating pressure in a hydraulic system to a maximum set pressure. The valve may be connected into the pressure line so that system pressure flows through, or it may be teed off the pressure line with one of the pressure ports plugged. When the system reaches the maximum desired setting, the internal piston moves to smoothly relieve pressure to tank, maintaining stable pressure control and repeatability. Ports are also provided for a gauge and for remote pressure control. | *$89.99 |
 | NorthStar Steel Hydraulic Oil Tank - 7 Gallon Brand: NorthStar Features sturdy 12-gauge steel welded construction. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 4010 fits oil tank Item# 4051 (strainer not included). Capacity (gal.): 7, Suction Port (in.): 2, Return Port (in.): 1, Mount Type: 2 bolt, Material Type: Steel, Dimensions L x W x H (in.): 16 x 10 x 10 1/2 | *$89.99 |
 | Prince Control Valve - 4-Way/3-Position Motor Spool, Model# SVW1CA1 Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with hydraulic motors. Use with double-acting cylinders. U.S.A. Max. Flow (GPM): 12, Working Port (in.): 3/4-16 ORB, 8 SAE, Max. PSI: 3,000, Directional Control: 4 way, 3 position, Adjustable Release Pressure PSI: 1,500 - 3,000 | *$89.99 |
 | Prince Control Valve - 4-Way/3-Position, Detent, Model# SVW1BB1 Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with double-acting cylinders. U.S.A. Inlet Port (in.): #10 SAE, Working Port (in.): #8 SAE, Max. PSI: 3,000, Max. Flow (GPM): 12, Adjustable Release Pressure PSI: 1,500 - 3,000 | *$89.99 |
 | Apache Hydraulic Hose - 100ft.L x 1/4in. Dia., 2750 PSI, Model# 98392203 Brand: Apache Hose Boxed hydraulic hose. Cut it to length needed and attach reusable couplings (couplings sold separately). SAE 100R1, type AT. Hose Diameter (in.): 1/4, Hose Length (ft.): 100, Working Pressure (PSI): 2,750, Bursting Pressure (PSI): 11,000 | *$89.99 |
 | Apache Hydraulic Hose 1in. Dia., 25ft. Length, 2000 PSI rated Brand: Apache Hose Boxed hydraulic hose. You can cut it to lengths you need and attach reusable couplings, sold separately. SAE 100R2, type AT. 2000 PSI. Hose Diameter (in.): 1, Hose Length (ft.): 25, Working Pressure (PSI): 2,000 | *$89.99 |
 | Prince Directional Control Valves-Inlet Section, Model# 2012H Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. You can combine 1 to 10 sections per valve bank. Standard features: Load checks on each work port. Hard chrome plated spools, Compact construction to save space. Reversible handle. Extra fine spool metering. Parallel or tandem circuit. Foot mounting. Maximums: 20 GPM; operating temperature 180deg F and 3500 PSI. Power beyond plug and pressure, interchangeable with Gresen V20. | *$89.99 |
 | Prince Directional Control Valves-Inlet Section, Model# 2012J Brand: Prince Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. You can combine 1 to 10 sections per valve bank. Standard features: Load checks on each work port. Hard chrome plated spools, Compact construction to save space. Reversible handle. Extra fine spool metering. Parallel or tandem circuit. Foot mounting. Maximums: 20 GPM; operating temperature 180deg F and 3500 PSI. Power beyond plug and pressure, interchangeable with Gresen V20. | *$89.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 3/4-16 thds., Stroke = .313 (1 Each) Brand: De-Sta-Co Part Number: 010-210-501 Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial." | *$89.71 |
 | IMPERIAL 90767 FLARE ANGLE NEEDLE VALVE 1/4" (PACK OF 5) Brand: Imperial Model: 90767 Part Number: 90767 "IMPERIAL" NEEDLE VALVE
SAE 45° Flare Angle Needle Valve.
Brass body and steel handle.
Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear, or aircraft applications.
Temperature Range: -65° F. to 250° F. however, system temperature and type of tubing should be considered.
Pressure Range: 150 psi maximum
Tube Outside Diameter: 3/8"
Pipe Thread: 1/4"
Cross Reference: 330 | *$89.56 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-471ST (1 Each) Brand: Reid Supply Company Part Number: TS-471ST These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$89.00 |
| | IMPERIAL 90644 BULKHEAD COUPLING 1-1/4"x1/2" (PACK OF 5) Brand: Imperial Model: 90644 Part Number: 90644 "IMPERIAL" BULKHEAD COUPLING
Bulkhead Coupling.
Typical applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400°. F.
Material: Carbon steel - AISI/SAE 12L14
Plating: Zinc; yellow dichromate finish
Male Pipe Thread: 1/2"
Female Pipe Thread: 1/4"
Hex Nut Thread: 3/416"
Fixed Hex: 1-1/4"
Inside Diameter: 0.312"
Panel Face To End Length: 1.13"
Overall Length: 2.16" | *$88.47 |
 | IMPERIAL 192031 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M12x8MM (PACK OF 5) Brand: Imperial Model: 192031 Part Number: 192031 "IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube X M12 X 1.5 metric thread - male connector. | *$85.99 |
 | Piston Pump For Aggressive Chemicals Brand: Global Industrial Part Number: THP-ST STAINLESS STEEL DRUM PUMP Stainless steel drum pumps can be used on 15, 30 and 55-gallon drums. Drum pump fits 2" bung opening and the collar adjusts for depth. Stainless steel drum pumps work well with corrosives, such as MEK, acetone and toluol. | *$85.95 |
 | Westward 1MZJ6 Hydraulic Economy Shop Press, 20 Tons Brand: WestWard Tools Hydraulic Economy Shop Press, Frame Capacity 20 Tons, Ram Travel 9 1/8 In, Hose Size 1/4 In Inner Diameter x 6 Inches, Base Length 28 In, Base Width 28 In, Pump Type Bottle Jack, Working Width 8 5/8 In, Overall Height 64 1/4 In, 2 1/2 to 34 1/8 In Range of Working Space Allows a Variety of Uses Economically, Includes Bottle Jack | *$844.55 |
 | BSM PUMP 713-4-7 "B-SERIES" PEDESTAL MOUNT GEAR PUMP Brand: BSM PUMP Model: 713-4-7 Part Number: 713-4-7 "BSM PUMP" PEDESTAL MOUNT GEAR PUMP
BSM 'B' and 'S' series pumps are a good choice for a variety of recirculating, mixing, transfer, hydraulic, and metering applications. These pumps are available pedestal or flange mounted, with integral relief valve, and constructed of cast iron, ductile iron, or bronze. Seal options include compression packing, lip seal, and mechanical seal. Standard pumps will operate at 200 psi and 250 deg. F. Typical liquids pumped include various oils, machine tool coolant, solvents, resins, paints, varnishes, and many other liquids.
Highlights:
Speed 900 rpm [Max]
Displacement 0.02980 Gal/Cycle
Slip gpm/psi 0.00800
0 PSI Flow / Power 26.8 gal/min @ 0.50 hp
50 PSI Flow / Power 26.4 gal/min @ 1.30 hp
100 PSI Flow / Power 26.0 gal/min @ 2.30 hp
Rotation CW or CCW
Port Size 1 1/4 in
Shaft Diam 0.75 in
Shaft Height 3.88 in
Height 5.810 in
Width 4.440 in
Length 9.880 in
Gear Type Helical
Gear Material Steel
Housing Material Iron
Mounting Pedestal
Type With Relief Valve | *$840.99 |
 | Adjustable Flow Control Valve - 1/2in. Port Size Brand: Prince Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-16 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. | *$84.99 |
 | Adjustable Flow Control Valve - 3/4in. Port Size Brand: Prince Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-30 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. | *$84.99 |
 | IMPERIAL 97460 FLUSH FACE HYDRAULIC QUICK COUPLER 3/8" - STEEL Brand: Imperial Model: 97460 Part Number: 97460 "IMPERIAL" DOUBLE SHUT-OFF HYDRAULIC COUPLER
Seals are made of nitrile.
3000 PSI.
Body Size: 3/8.
Steel Construction.
Female Thread: 3/8. NPTF.
Tomco No.: EC3-21.
Parker No.: FF371-6FP.
Aeroquip No.: FD49-1001-06-06.
Temperature Range: -40° to 225° F.
Referred to as "Dry Seal" type quick couplers.
Heavily plated steel construction.
Shut-off valves in the nipple and coupler.
Conforms to all the requirements of ANSI/HTMA.
Face-guide is designed to simplify hook-up without slip-off.
International interchangeability in application requiring no fluid loss.
Can be used with Flush Face Double Shut-Off Hydraulic Coupler Nipple, Part No. 97461. | *$84.99 |
 | Lion Tie-Rod Cylinder - 2500 PSI, 2in.Bore, 8in. Stroke, 1 1/8in. Shaft, Model# 20TL08-112 ASAE Brand: Lion 2500 Built tough for agricultural and industrial applications. Rated for 2500 PSI continuous working pressure and designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision-ground, polished and hard chrome-plated. 8in. stroke cylinders threaded rods accept adjustable stroke controls. 2in. and 2 1/2in. bore cylinders have 3/8in. working ports; 3in., 3 1/2in. and 4in. bore have 1/2in. working ports. ALL have 1in. pin holes. Max. PSI: 2,500, Bore Diameter (in.): 2, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 1/8 | *$84.99 |
 | Prince Two-Way Detent Valve, Model# LS-3010-2 Brand: Prince For open center systems. Two-way detent; 3/4in. in/out 3/4in. work ports. Relief valve adjustable to 2750 PSI, preset at 2250 PSI, flow rating up to 25 GPM. Automatically kicks back to neutral when cylinder completes stroke. Built-in relief valve ports. Hydraulic balanced, hard chrome plated spool. Handle can be installed in up or down position. Detent release pressure adjustable from 600 to 2000 PSI. Warning: using a pressure detent in both directions can be dangerous. USA | *$84.99 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-971ST (1 Each) Brand: Reid Supply Company Part Number: TS-971ST These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$83.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-122, Use w/cap. = 2,600 lbs. (1 Each) Brand: Reid Supply Company Part Number: CAL-122 These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$83.00 |
 | 34300 Quick Draw 90 Set (332-7906SB) Category: Hydraulic Knockout Punches Brand: Greenlee Part Number: 7906SB Item #: 332-7906SB. Develops 8 tons of hydraulic force for easy punchingbrQuick Draw 90r''s right angle driver head rotates over 180 degrees for maximum flexibility in tight working areas pulliThroat Includes = Quick Draw 90® Driver, (2) Draw Studs, (1) Adapter, (1) Spacer, CaseliWt. = 10 lb/ul brCustomers also search for: Discount 34300 Quick Draw 90 Set, Buy 34300 Quick Draw 90 Set, Wholesale 34300 Quick Draw 90 Set, 783310343004, 7906SB, Hydraulic Knockout Punches | *$825.00 |
 | Driver-quik Draw 1/2"-2 (332-7806-SB) Category: Hydraulic Knockout Punches Brand: Greenlee Item #: 332-7806-SB. Develops 8 tons of hydraulic force for easy punchingbrQuick Draw 90r''s right angle driver head rotates over 180 degrees for maximum flexibility in tight working areas pulliThroat Includes = Quick Draw® Driver, (2) Draw Studs, (1) Adapter, (1) Spacer, CaseliWt. = 10 lb/ul brCustomers also search for: Discount Driver-quik Draw 1/2"-2, Buy Driver-quik Draw 1/2"-2, Wholesale Driver-quik Draw 1/2"-2, 783310342939, 7806-SB, Hydraulic Knockout Punches | *$823.54 |
 | Blackhawk Automotive (BLA65593) 6 Foot Hydraulic Pump/ Porta Power Hose Brand: BlackHawk pstrongFeatures and Benefits:/strong ulliHose size: 3/8"/li liLength: 6â/liliConnection: 3/8 in. NPT/liliCoupler: B65581/li /ul | *$82.99 |
 | IMPERIAL 192030 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M10x8MM (PACK OF 5) Brand: Imperial Model: 192030 Part Number: 192030 "IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube X M10 X 1.0 metric thread - male connector. | *$82.99 |
 | Ryton Rotary Pump For Aggressive Chemicals Brand: Global Industrial Part Number: 10212 Rotary Drum Pump - Ryton Ryton construction with ryton vanes, viton oil seal and teflon flange gaskets. Used for aggressive chemicals such as chlorinated solvents and hydrocarbons. Not recommended for ketones and ethers and very strong oxidizing agents in concentrated form. Dispenses 8 oz. per revolution. Includes 2" bung adapter, 3 piece 14"dia. x 44"L suction tube with strainer and 1" discharge spout. | *$82.95 |
 | IMPERIAL 92363 "90-SERIES" FEMALE JIC SWIVEL FITTING 1/4x5/16 (PACK OF 5) Brand: Imperial Model: 92363 Part Number: 92363 "IMPERIAL" FEMALE JIC SWIVEL FITTING
Tube Size: 5/16
Universal fit - 37° and 45°.
Hose Inside Diameter: 1/4
Thread Size: 1/2 20
Cut-Off Factor: 1-3/32
Cross Reference: 20690-5-5
Reusable 90-Series Female JIC Swivel Fitting for Teflon® Hose. | *$82.59 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1/2-20 thds., Stroke = .219 (1 Each) Brand: De-Sta-Co Part Number: 010-210-400 Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial." | *$82.23 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-2131ST (1 Each) Brand: Reid Supply Company Part Number: TS-2131ST These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$82.00 |
 | ANCHOR BRAND B24000 BRASS REPLACEMENT GAUGE 2" (PACK OF10) Brand: Anchor Model: B24000 Part Number: B24000 "ANCHOR BRAND" BRASS REPLACEMENT GAUGE
Type: Replacement Gauge
Diam: 2 in
Thread Size: 1/4 in (NPT)
Pressure: 400.00 psi
Case Material: Brass
One-piece threaded polycarbonate lens
Cupped aluminum dial with white background and red and/or black markings. | *$81.99 |
 | JET 453313 Hydraulic Jack Only Brand: Jet Model: 453313 Part Number: 453313 Jacks - Heavy Duty Hyd. Jack-12-1/2" X 6-3/4" X | *$80.99 |
 | St106 Flange Pins2 Per (432-780430) Category: Hydraulic Tool Parts Brand: Sumner Model: 780430 Part Number: 780430 Item #: 432-780430. Quick installing pins work as convenient reference points to level flange for tack and weld out - no tools neededbrFeatures acme threads for maximum clamping power and hardened steel for long lasting use pulliOperating Face Hole Diameter = 5/8 in [Min], 1 5/8 in [Max]liInside Wt. = 4 lb/ul brCustomers also search for: Discount St106 Flange Pins2 Per, Buy St106 Flange Pins2 Per, Wholesale St106 Flange Pins2 Per, 661165804300, 780430, Hydraulic Tool Parts and Accessories | *$80.99 |
 | IMPERIAL 97404 HYDRAULIC QUICK COUPLER 3/4" Brand: Imperial Model: 97404 Part Number: 97404 "IMPERIAL" HYDRAULIC QUICK COUPLER
Body Size: 3/4"
PSI: 2,500 lbs.
Cross Reference: H6-63
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 3/4ndash14;
Temperature Range: -40° F. to 250° F.
Can be used with Hydraulic Quick Coupler Nipple, Part No. 97414
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$80.69 |
 | 12' Washing Machine Inlet Hose Brand: Aqua Plumb Easy to install, heavy duty replacement washing machine inlet hose connection water supply to washing machine. Hose reinforced to withstand high pressure and can be used with
cold or hot water. | *$8.99 |
 | ALEMITE 3016 SPECIAL THREAD GREASE FITTING PRICE INDICATED IS FOR PACK OF 6 Brand: Alemite Model: 3016 Part Number: 3016 "ALEMITE" SPECIAL THREAD GREASE FITTING
Special threads and sizes for special lubrication purposes. All have high-pressure ball check unless otherwise specified
Highlights:
Type: straight
No ball check.
Overall Length:1/2"
Shank Length: 1/8"
Hex Size: 1/4"
Thread: 10-32 UNF-2A | *$8.99 |
 | Breather Cap - 1in. NPT Size Brand: Northern Tool Equipment Ventilators filter particles as small as 40 microns. U.S.A. | *$8.99 |
 | Breather Cap - 3in. Dia. Brand: Northern Tool Equipment Ventilators filter particles as small as 40 microns. U.S.A. | *$8.99 |
 | Buyers 1in. Hydraulic Pillow Block, 2 Bolt Brand: Buyers Match size with pillow block when ordering. | *$8.99 |
 | Buyers 1in. Hydraulic Pillow Block, 4 Bolt Brand: Buyers Match size with pillow block when ordering. | *$8.99 |
 | Buyers 3/4in. Hydraulic Pillow Block, 4 Bolt Brand: Buyers Match size with pillow block when ordering. | *$8.99 |
 | IMPERIAL 97363 QUICK DISCONNECT COUPLER PLUG 3/8X3/8FNPT(PACK OF 2) Brand: Imperial Model: 97363 Part Number: 97363 "IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 3/8"
Female NPT: 3/8"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$8.99 |
 | IMPERIAL 97365 QUICK DISCONNECT COUPLER PLUG 1/4"x1/4"FNPT - LINCOLN DESIGN (PACK OF 2) Brand: Imperial Model: 97365 Part Number: 97365 "IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Female NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Lincoln Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$8.99 |
 | IMPERIAL 97377 QUICK DISCONNECT COUPLER PLUG 1/4"x3/8"FNPT (PACK OF 2) Brand: Imperial Model: 97377 Part Number: 97377 "IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Female NPT: 3/8"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$8.99 |
 | IMPERIAL 97744 "SERIES 320" HIGH FLOW COUPLER PLUG 3/8"NPT-FEMALE Brand: Imperial Model: 97744 Part Number: 97744 "IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Size: 1/4"
Female NPT: 3/8"
High flow design.
Flow Capacity: 74.3 CFM
Material: brass/steel.
Plating: Nickel
Coupler Plug Female Pipe Thread.
Maximum Working Pressure: 232 psi (16 bar)
Minimum Burst Pressure: 2030 psi (140 bar)
Male threads come with preapplied thread sealant.
Heavy-duty quick disconnect coupler plugs high flow series 320
Not interchangeable with any other system or design of couplers. | *$8.99 |
| | IMPERIAL 99440 FLAT FACE STRAIGHT THREAD O-RING CONNECTOR FITTING 1/4X1/4(PACK OF 2) Brand: Imperial Model: 99440 Part Number: 99440 "IMPERIAL" O-RING CONNECTOR FITTING
Tube Size: 1/4
Port Thread: 1/4
Material: 12L14 steel.
Sealing Method: O-ring
Vibration: Excellent resistance
For-Seal Thread Size: 9/16 - 18
Pressure: Operating pressure to 6,000 psi
Typical Application: High pressure hydraulic, pneumatic, and chemical processing. | *$8.99 |
| | IMPERIAL 99443 FLAT FACE O-RING STRAIGHT THREAD CONNECTOR FITTING 3/8X3/8(PACK OF 2) Brand: Imperial Model: 99443 Part Number: 99443 "IMPERIAL" FLAT FACE O-RING MALE ADAPTOR
Port Thread: 3/8
Cross Reference: 4315 x 6
Sealing Method: O-Ring
Material: 12L14 steel
Tube Outside Diameter: 3/8
For-Seal Thread Size: 11/1616
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing.
Flat Face O-Ring Straight Thread O-Ring Connector Fitting (Reference SAE No. 520120). | *$8.99 |
 | IMPERIAL 99494 FOR-SEAL O-RING FOR FLAT FACE O-RING FITTING 3/4 Brand: Imperial Model: 99494 Part Number: 99494 "IMPERIAL" FOR-SEAL O-RING
Tube Outside Diameter: 3/4
Cross Reference: 4629 x 12
Excellent vibration resistance.
Fitting Sealing Method: O-Ring.
Quantity: 10 per pack.
Material: Buna N 90 Durometer.
Maximum operating pressure to 6,000 psi.
For-Seal O-Ring for Flat Face O-Ring Fitting.
Temperature Range: -40° F. to 250° F. (-40° C. to 121° C.)
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$8.99 |