 | SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/4" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/4", OD.0.58", Working Pressure 3000 PSI, Min. Burst Pressure 12000 PSI, Min. Bend Radius 3.4", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.18 Lbs., Reel Package | *$4.22 |
 | Watts Water Technologies WP15B-0808PB Pex Brass Coupling
Brand: Watts Water Technologies Model: WP15B-0808PB Part Number: WP15B-0808PB
For polyethylene (PEX) crimp system. For hot or cold water applications. Copper crimp rings not included. Bagged. No. P 300: 3 8'' barb x 3 8'' barb No. P 517: 3 8'' barb x 1 2'' barb No. P 500: 1 2'' barb x 1 2'' barb No. WP15B 0808PB: 10 pack, 1 2'' barb No. P 701: 3 4'' barb x 1 2'' barb No. P 700: 3 4'' barb x 3 4'' barb No. WP15B 1212PB: 10 pack, 3 4'' barb No. 15B 1612: 1'' barb x 3 4'' barb No. 15B 1616: 1'' barb x 1'' barb | *$4.17 |
 | Elkhart Prod. Corp. 10170095 QTite Female Adapter
Brand: Elkhart Part Number: 10170095
QTite, Female adapter fittings provide a clean and easy joining method that's designed to save time and money on installations, installing a joint is simple, requires no extra materials for copper and CPVC tubing installations and a tube liner for PEX installations, no more solder, flux, heat, or special pressing tools needed. Results in lower costs, reduced labor time, and clean and efficient installation process. No. 10170090: 1 2'' No. 10170095: 3 4'' | *$4.14 |
 | Elkhart Prod. Corp. 10170125 QTite Male Adapter
Brand: Elkhart Part Number: 10170125
QTite, Male adapter, fittings provide a clean and easy joining method that's designed to save time and money on installations. Installing a joint is simple, requires no extra materials for copper and CPVC tubing installations, and a tube liner for PEX installations, no more solder, flux, heat, or special pressing tools needed. Results in lower costs, reduced labor time, and a clean and efficient installation process. No. 10170120: 1 2'' No. 10170125: 3 4'' | *$4.14 |
 | Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/4"
Brand: IWS
Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/4", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$4.11 |
| | Air Brake Compression Nut, 3/4" Tube size
Brand: IWS
Air Brake Compression Nut, 3/4" Tube size | *$4.11 |
 | Air Brake Compression Union, 3/8" tube size
Brand: IWS
Air Brake Compression Union, 3/8" tube size | *$4.11 |
 | Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 1-9/16" ID, Pack of 27 | *$4.11 |
 | Watts Water Technologies 18B-161212 Brass PEX Tee
Brand: Watts Water Technologies Part Number: 18B-161212
For polyethylene (PEX) crimp system. For hot or cold water applications. Copper crimp rings not included. Bagged. No. P 340: 3 8'' CF x 3 8'' CF x 3 8'' CF No. P 542: 1 2'' CF x 1 2'' CF x 3 8'' CF No. P 540: 1 2'' CF x 1 2'' CF x 1 2'' CF No. WP 18B 08PB: 10 pack, 1 2'' CF No. P 543: 1 2'' CF x 1 2'' CF x 3 4'' CF No. QQT322XPK1: 1 2'' CF x 3 8'' CF x 3 8'' CF No. P 740: 3 4'' CF x 3 4'' CF x 3 4'' CF No. WP 18B 12PB: 10 pack, 3 4'' CF No. P 742: 3 4'' CF x 3 4'' CF x 1 2'' CF No. 18B 161212: 1'' CF x 3 4'' CF x 3 4'' CF No. 18B 161608: 1'' CF x 1'' CF x 1 2'' CF No. 18B 161612: 1'' CF x 1'' CF x 3 4'' CF No. 18B 16: 1'' CF x 1'' CF x 1'' CF | *$4.07 |
| SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16", OD.0.52", Working Pressure 3000 PSI, Min. Burst Pressure 12000 PSI, Min. Bend Radius 3.0", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.13 Lbs., Box Package | *$4.02 |
| SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16", OD.0.52", Working Pressure 3000 PSI, Min. Burst Pressure 12000 PSI, Min. Bend Radius 3.0", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.13 Lbs., Reel Package | *$4.02 |
 | Air Brake Compression 90° Male NPT Connector, 3/8" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression 90° Male NPT Connector, 3/8" Pipe Size, 3/8" tube size | *$4.02 |
 | Hydraulic Cable Cutter Sets Model Code: AC - Price is for 1 Each (part# 750E975)
Brand: Greenlee Part Number: 750E975
750E975 Model Code: AC - Price is for 1 Each (part# 750E975) This item features: -Jaws are specially hardened to hold sharpness and slide open quickly to reduce cutting time. -Capacity Wt.: 11 tons. -Type: Cable Cutter. -Applicable Materials: Aluminum, Copper. -Cable/Wire Size (2): 1000.000 kcmil [Max]. -Jaw Opening: 1 15/16 in [Max]. Model Code  Model Description AAIncludes:Hydraulic Cutter, Ram, 767 Hand Pump, Hydraulic Hose, Storage Box, Wt.:29 lb ABIncludes:Hydraulic Cutter, Ram, Storage Box, Wt.:25 lb ACIncludes:Ram, Hydraulic Cutter, 975 Electric Hydraulic Pump, Hydraulic Hose, Storage Box, Wt.:84 lb | *$4,824.48 |
 | 100 Ton Capacity Air/Hydraulic Shop Press (SUN52100)
Brand: Sunex Part Number: 52100
Item #: SUN52100. pbFeatures Benefits:/bulliMade in USA pump and ram/liliAll steel welded frame contruction/lili1/3 Hp Haskel air motor/liliWinch bed lift with auto brake/liliDrop Ship Only/li/ul brCustomers also search for: Discount 100 Ton Capacity Air/Hydraulic Shop Press, Buy 100 Ton Capacity Air/Hydraulic Shop Press, Wholesale 100 Ton Capacity Air/Hydraulic Shop Press, 613364044292, ToolWeb, Porta Powers and Pumps | *$4,645.99 |
 | Subaru Robin 6.8 HP Diesel Engine with 3" Trash Pump
Brand: enginepoweredpumps.com Model: epp_PTD310T Part Number: epp_PTD310T
Subaru Diesel Robin engine combination that is the best choice when extracting larger volumes of debris in clear water, sandy water, muddy water or water with high solid content. This diesel trash pump features deep impeller vanes and a large volute discharge opening that can pass suspected sticks without ever damaging the components. Perfect for construction, agricultural or industrial sites. Includes an intake strainer to attach to intake line, which prevents over-sized debris from entering your pump and damaging it. | *$4,465.68 |
 | 80400 Hand Pump w/100 Ton Rch Cylinder (277-SCH-1003H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCH-1003H
Item #: 277-SCH-1003H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 100 tons [Max]liCylinder Stroke = 3.000 inliCollapsed Height = 10 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RCH-1003 Cylinder, P-80 Hand Pump, HC-7206 Hose, GA-2 Gauge Adaptor, GP-10S GaugeliQuantity = 5 per setliWt. = 169 lb/ul brCustomers also search for: Discount 80400 Hand Pump w/100 Ton Rch Cylinder, Buy 80400 Hand Pump w/100 Ton Rch Cylinder, Wholesale 80400 Hand Pump w/100 Ton Rch Cylinder, 662005804009, SCH-1003H, Hydraulic Sets | *$4,461.50 |
 | Electric Hydraulic Pumps Model Code: AA (part# 980)
Brand: Greenlee Part Number: 980
980 Model Code: AA (part# 980) This item features: -Automatic or manual ram selector valve. -Low voltage pendant coupled to solid state motor controls eliminates contact arcing. -Pendant advance control. -Molded enclosure protects pump, motor, and circuitry. -For use with single hose hydraulic systems with spring return rams. -Handy pendant advance control. -Low voltage pendant coupled to solid state motor controls eliminates contact arcing for greater reliability and longer life. -Automatic or manual ram return selector valve provides more control from the pendant switch. -Molded enclosure protects pump, motor and circuitry in tough working environments. -Use with single hose hydraulic systems with spring return rams. -Operating Pressure: 10000.0 psi [Max]. -Length: 12 in. -Price is for 1 Each. Model Code  Model Description AAUsed With:All Greenlee Benders, Flow:4.8 mL/h [Max], Flow @ Pressure:0.90 L/min @ 10000 psi, Power Cap.:1 1/2 hp [Max], Voltage:120.00 VAC, Frequency:60.0 Hz, Width:12 in, Height:17 1/2 in, Type:Hydraulic Pump, Capacity Vol.:5.70 L, Power Source:Electric, Wt.:71 lb ABUsed With:All Greenlee Benders, Useable Oil Cap.:6.0 qt [Max], Power Cap.:1 1/2 hp, Voltage:220.00 VAC, Frequency:50.0 Hz, Width:12 in, Height:17 1/2 in, Wt.:71 lb ACUsed With:Greenlee 2 in. Capacity Benders, Flow:4.0 mL/h [Max], Flow @ Pressure:0.30 L/min @ 10000 psi, Power Cap.:1/2 hp [Max], Voltage:120.00 VAC, Frequency:60.0 Hz, Width:10 in, Height:15 1/2 in, Type:Hydraulic Pump, Capacity Vol.:2.80 L, Power Source:Electric, Wt.:51 lb | *$4,407.54 |
 | Sunex Tools (SUN5250EP) 50 Ton Capacity Electric Production Press with Winch
Brand: Sunex Part Number: 5250EP
pstrongFeatures and Benefits:/strong/pul liAll welded steel construction/li li6-1/4" chrome ram with 8" stroke/li liWinch bed lift with auto brake/li li2 HP Emerson electric motor/li liTwo speed pump with remote pendant control/li/ulSpeed: No load 18"/Min = 40 sec up and down; Full load (50 tons) 4"/Min = 1-1/2 min down 20 sec up. Bed plates, bearing punch and bearing shield included as standard equipment. Height: 74". Made in the USA. Drop Ship Only | *$4,356.99 |
 | Prince Hydraulic Control Valve - 8 GPM, 5-Spool, Model# MB51BBBBB5C1
Brand: Prince
This Prince hydraulic control valve features a compact design that is ideal for tractors and other low flow operations. SAE #8 ports eliminate leakage, enclosed handles eliminate exposure to elements. 4-way, 3-position spring center; can be converted to closed center or Power Beyond. 3500 max. PSI; 2000-3500 PSI adjustable relief, preset at 2500 PSI. Max. Flow (GPM): 8, Inlet Port (in.): SAE ;pound;8, Outlet Port (in.): SAE ;pound;8, Working Port (in.): SAE ;pound;8, Max. PSI: 3,500, Directional Control: 4-way, 3-position, Spool (qty.): 5, Adjustable Release Pressure PSI: 2,000-3,500, preset 2,500 | *$399.99 |
 | Haldex Hydraulic Pump - 28 GPM, 2-Stage, Model# 1080036
Brand: Haldex
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 5/8, GPM: 28, Stage: 2, Rotations Per Minute: 4,000 | *$399.99 |
 | Mov-It Tire Products Air Operated Hydraulic Foot Pump, Model# AHP-5Q
Brand: MTP
Mov-It Tire Products air operated hydraulic foot pump is built tough for long service life and easy operation. Application: Foot pump, Length (in.): 12ft. hose, Size: 3/8 quick connector | *$399.99 |
 | Enerpac Hydraulic Power Workholding No. STRD121, Light Duty, Double Acting, Threaded, w/o Arm (1 Each)
Brand: Enerpac Part Number: STRD-121
Hydraulic Power Workholding - Light Duty - These swing cylinders rotate 90° as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
| Enerpac Hydraulic Power Workholding No. STRS121, Light Duty, Single Acting, Threaded, w/o Arm (1 Each)
Brand: Enerpac Part Number: STRS-121
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
 | Enerpac Hydraulic Power Workholding No. SLRS51, Light Duty, Single Acting, Lower Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SLRS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
 | OTC Tools (OTC5180) 10-Ton Capacity Portable Multipurpose Press
Brand: OTC Part Number: 5180
ulli Lightweight (less than 28 lbs.) and durable, the 5180 portable press is perfect for industrial, marine, roadside maintenance, and general automotive applications.li Use for all clamping, pressing, and bending needs. Ideal for welding and metal fabrication.li Press can be positioned vertically or horizontally.li Versatile 9" – 4-1/4" Open-ThroatTM design.li Couples to any 4- or 10-ton Porta Power pump.li Base allows the operator to mount the press to a bench.Set includes–C-Frame press with base, adapters: V-pushing and ram pushing (9/16" and 3/4" dia. shanks), receiving inserts, flat insert, storage case./ul | *$393.99 |
 | IMPERIAL 93413 #H56908 HYDRAULIC HOSE 13/32" - 50' LENGTH
Brand: Imperial Model: 93413 Part Number: 93413
"IMPERIAL" HYDRAULIC HOSE
Hose ID: 13/32"
Hose OD: 49/64"
Hose Lengh: 50 feet.
Minimum Bend Radius: 4-5/8"
Cross Reference: H56908
ABS approved sizes for 5/16" to 1-1/8".
Maximum Working Pressure: 2000 psi
Minimum Burst Pressure: 8000 psi
SAE 100R5, SAE J1402 Type All, DOT A11*, ABS (*Air brake applications limited to sizes -04 through -12)
Temperature range:(hydraulic fluid: -55° F to 302° F,Air brake: -40° F to 200° F,Air: -40° F to 212° F
Hose Construction:(Inner tube: CPE,Cover: fiber braid,Reinforcement: two fiber braids and one steel braid).
Applications: general purpose truck, marine, and hydraulic hose. For air brake (4-12), diesel fuel, grease lines, high temp. petroleum oils and medium pressure hydraulic applications. | *$392.19 |
 | Udor Iota 20 Pump
Brand: justudorpumps.com Model: jup_Iota-20 Part Number: jup_Iota-20
The Udor Iota 20 Pump is a 2-diaphragm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever and pressure gauge. This Iota 20 is a direct replacement pump for any Iota 17 pump. These Iota pumps by Udor are commonly used for horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. They can also be used for seal coating concrete and cleaning. | *$391.57 |
 | Westward 5M461 Ram, Hydraulic, 10 Ton
Brand: WestWard Tools
Air/Manual Hydraulic Ram, Capacity 10 Tons, Pump Pressure 10,000 PSI, Base Size 22 x 6 1/8 Inches, Handle Length 13 Inches, Converts 10 Ton Ram Kit to Air Operation | *$390.93 |
 | Buyers Hydraulic Oil Suction Strainer
Brand: Buyers
Suction line filter assembly with 3/4in. NPT ports with bypass for cold start protection. Includes 149 micron stainless steel mesh element. This filter may be used where it is not possible to use an in-tank suction strainer. Not for use with pumps larger than 15 GPM. | *$39.99 |
 | Buyers Flush-Face Plug - 1/2in. Male; 3/4in. Port NPT, Model# FM0812
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$39.99 |
 | 3/8 NPT, 125.3 SCFM Flow, Parker Check Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-306
Needle, Check and Flow Control Valves | *$39.80 |
 | 3/4 Bore x 2. Stroke, Double Acting - Front Block Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-57
Front Block Mount - Double Acting | *$39.60 |
 | 1 1/2 Bore x 3. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-220
1-1/2" Bore Stud Mount Double Acting | *$39.46 |
 | Teejet Poly Pressure Regulator 23120A - 1/2" With Viton Parts
Brand: hypro-piston-pumps.com Model: hrp_23120A-1_2-PP Part Number: hrp_23120A-1_2-PP
The TeeJet Pressure Regulator 23120A 1/2" with Viton parts is constructed of polypropylene and features a stainless steel spring and EPDM O-rings allowing for excellent chemical resistance. It can handle pressures up to 150 psi and a maximum flow of 12 gpm. | *$39.45 |
 | 3/4 Bore x 4. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-69
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$39.37 |
 | 20 Ton RAM BODY FRAME Repair Hydraulic Porta Power
Brand: Generic
This item includes:
-Wrench
-Base
-4-3/4" Ram Toe
-V-Base
-Wedge Toe
-Plunger Toe
-5" Connective Tube
-10" Connective Tube
-2-1/2" Joint Connector Tube x 3 PCS
-3" Connective Tube x 3 PCS
-20" Connective Tube
-27" Connective Tube
-2 Storage Cases
DONT WANT TO PAY FOR SHIPPING and live in Southern California? This item is available for pick up!!! Email us at Prolinetrading@sbcglobal.net and ask how?! | *$389.99 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 3000 PSI, 5in. Bore, 24in. Stroke, Model # 50TH24-200
Brand: Lion 3000
Built tough for agricultural and industrial applications. 3000 PSI model is designed to withstand shock loads of up to 6000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. Cylinder can be single or double acting. Attach one port for single and both ports for double acting. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 24, Closed Pin Center (in.): 36 1/4, Shaft Diameter (in.): 2 | *$389.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 24in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 24, Closed Pin Center (in.): 36 1/4, Shaft Diameter (in.): 2 | *$389.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2 in. Bore, 30in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 30, Closed Pin Center (in.): 42 1/4, Shaft Diameter (in.): 2 | *$389.99 |
 | IMPERIAL 192078 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M22x12MMx1.5" (PACK OF 5)
Brand: Imperial Model: 192078 Part Number: 192078
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
12MM tube x M22 X 1.5 metric thread - male elbow.
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
12MM tube x M22 X 1.5 metric thread - male elbow. | *$385.99 |
 | IMPERIAL 97416 TEST PORT COUPLER 1/8"x1/8-27" (PACK OF 5)
Brand: Imperial Model: 97416 Part Number: 97416
"IMPERIAL" TEST PORT COUPLER
Body Size: 1/8
Female Thread: 1/827
Overall Length: 1.67
Test Port Coupler.
Cross Reference: PD222 | *$384.19 |
 | 1 1/4 Bore x 4. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-185
1-1/4" Bore Stud Mount Double Acting | *$38.96 |
 | Silicone Coolant Hose, 23/4"
Brand: IWS
Silicone Coolant Hose, 2-3/4" ID x 3.12" OD, Working Pressure 30 PSI, 4 Feet Per Case | *$38.82 |
 | 1 1/4 Bore x 2. Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-195
1-1/4" Bore Universal Mount Double Acting | *$38.76 |
 | IMPERIAL 99463 FLAT FACE O-RING MALE CONNECTOR FITTING 5/8X1/2(PACK OF 2)
Brand: Imperial Model: 99463 Part Number: 99463
"IMPERIAL" FLAT FACE O-RING MALE ADAPTOR
Male Pipe Size: 1/2"
Material: 12L14 steel.
Sealing Method: O-Ring
Excellent vibration resistance.
Cross Reference: 4205 x 10
Tube Outside Diameter: 5/8"
Maximum operating pressure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$38.59 |
 | W/B/M Pre Hntr 12ga Full
Brand: Trulock Part Number: 57351
Precision Hunter Choke, Fullbr /br /The Precision hunter style chokes are extended, knurled and notched for use with a choke wrench. They are manufactured from high strength 17-4 PH stainless steel with an extremely smooth interior finish. They are suitable for use with steel shot from cylinder through improved modified. All chokes are marked on the head with the degree of choke and on the body with the exit diameter. There is no difference between the Precision Hunter and the Sporting Clay chokes except for the low glare black oxide finish. High quality, low maintenance, known constrictions and a reasonable price!br /br /- Fits: Winchester/Browning/Mossberg 12gabr /- Extendedbr /- Constriction: .700 | *$38.49 |
 | Beretta/Benelli Pre Hntr 12ga Skt
Brand: Trulock Part Number: 57054
Precision Hunter Choke, Skeetbr /br /The Precision hunter style chokes are extended, knurled and notched for use with a choke wrench. They are manufactured from high strength 17-4 PH stainless steel with an extremely smooth interior finish. They are suitable for use with steel shot from cylinder through improved modified. All chokes are marked on the head with the degree of choke and on the body with the exit diameter. There is no difference between the Precision Hunter and the Sporting Clay chokes except for the low glare black oxide finish. High quality, low maintenance, known constrictions and a reasonable price!br /br /- Fits: Beretta/Benelli 12gabr /- Extendedbr /- Constriction: .720 | *$38.49 |
 | W/B/M Pre Hntr 12ga IC
Brand: Trulock Part Number: 57359
Precision Hunter Choke, Improved Cylidnerbr /br /The Precision hunter style chokes are extended, knurled and notched for use with a choke wrench. They are manufactured from high strength 17-4 PH stainless steel with an extremely smooth interior finish. They are suitable for use with steel shot from cylinder through improved modified. All chokes are marked on the head with the degree of choke and on the body with the exit diameter. There is no difference between the Precision Hunter and the Sporting Clay chokes except for the low glare black oxide finish. High quality, low maintenance, known constrictions and a reasonable price!br /br /- Fits: Winchester/Browning/Mossberg 12gabr /- Extendedbr /- Constriction: .720 | *$38.49 |
 | Rem Pre Hntr 16 GA Skeet
Brand: Trulock Part Number: 57272
Precision Hunter Choke,Skeetbr /br /The Precision hunter style chokes are extended, knurled and notched for use with a choke wrench. They are manufactured from high strength 17-4 PH stainless steel with an extremely smooth interior finish. They are suitable for use with steel shot from cylinder through improved modified. All chokes are marked on the head with the degree of choke and on the body with the exit diameter. There is no difference between the Precision Hunter and the Sporting Clay chokes except for the low glare black oxide finish. High quality, low maintenance, known constrictions and a reasonable price!br /br /- Fits: Remignton 16gabr /- Extendedbr /- Constriction: .665 | *$38.49 |
 | W/B/M Pre Hntr 12ga Mod
Brand: Trulock Part Number: 57355
Precision Hunter Choke, Modifiedbr /br /The Precision hunter style chokes are extended, knurled and notched for use with a choke wrench. They are manufactured from high strength 17-4 PH stainless steel with an extremely smooth interior finish. They are suitable for use with steel shot from cylinder through improved modified. All chokes are marked on the head with the degree of choke and on the body with the exit diameter. There is no difference between the Precision Hunter and the Sporting Clay chokes except for the low glare black oxide finish. High quality, low maintenance, known constrictions and a reasonable price!br /br /- Fits: Winchester/Browning/Mossberg 12gabr /- Extendedbr /- Constriction: .710 | *$38.49 |
|
