 | Prince PTO Tractor Pump 23 GPM, Model# HC-PTO-3A
Brand: Prince
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. Max. PSI: 2,000, Shaft Diameter (in.): 1 3/8, Shaft Type: Spline 21-tooth, GPM: 23, Material: Aluminum and cast iron, Rotations Per Minute: 1,000, Weight (lbs.): 36 | *$484.99 |
 | Udor Model 5027.75 Gearbox
Brand: justudorpumps.com Model: jup_5027_75 Part Number: jup_5027_75
This Udor Model 5027.75 Gearbox comes ready to couple to the following pumps: RO 70; Udor Kappa 30, 40 and 55 pumps; Zeta 40 and 85 pumps; and 5 HP to 6.5 HP engines with 3/4" shafts. All Udor Gearboxes are black anodized, bearing supported and vented for longevity. | *$484.78 |
 | Silicone Coolant Hose, 31/2"
Brand: IWS
Silicone Coolant Hose, 3-1/2" ID x 3.87" OD, Working Pressure 15 PSI, 4 Feet Per Case | *$48.92 |
 | 3/4 Bore x 1/2 Stroke, Double Acting, Compact, ARO Composite Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: ARO-605
Cylinders are double acting, with a single rod end. Cylinder barrel is made from a unique cross-wound thermo set epoxy. This creates a very strong and lightweight cylinder. The high impact resistance reduces the chances of cylinder failure due to dings or dents. Interior surface is self-lubricating, which insures highly reliable performance and an extended seal life. Cylinder heads are clear anodized aluminum alloy with stainless steel tie bolts. Maximum pressure is 200 psi. Cylinder temperature rating is -25°F to +225°F. | *$48.87 |
 | 3/4 Bore x 6. Stroke, Double Acting - Front Block Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-61
Front Block Mount - Double Acting | *$48.69 |
| | IMPERIAL 90615 BULKHEAD COUPLING 1/2"x3/8" (PACK OF 2)
Brand: Imperial Model: 90615 Part Number: 90615
"IMPERIAL" BULKHEAD COUPLING
Typical applications include: grease, instrumentation and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400° F.
Material: Carbon steel - ANSI/SAE 12L 14
Plating: zinc; yellow dichromate finish
Male Pipe Thread: 1/2"
Female Pipe Thread: 3/8"
Hex Nut Thread: 1-14"
Fixed Hex: 1-1/8"
Inside Diameter: 0.402"
Panel Face to End Length: 0.70"
Overall Length: 1.688" | *$48.57 |
| | IMPERIAL 90649 BULKHEAD COUPLING 15/16" (PACK OF 5)
Brand: Imperial Model: 90649 Part Number: 90649
"IMPERIAL" BULKHEAD COUPLING
Bulkhead Coupling.
Typical applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400°. F.
Material: Carbon steel - AISI/SAE 12L14
Plating: Zinc; yellow dichromate finish
Female Pipe Thread: 1/4"
Hex Nut Thread: 3/416"
Fixed Hex: 1"
Hex Nut: 15/16"
Inside Diameter: 0.422"
Panel Face To End Length: 0.69"
Overall Length: 0.94" | *$48.44 |
 | Haldex 1 HP 115/208-230 Volt AC Hydraulic Power Unit, Solenoid, Model# 1530037
Brand: Haldex
Mounts vertically or horizontally. 60 Hz TEFC motor turns at 3450 RPM. .097 displacement pump and 1.5 gallon reservoir. Relief valve set at 2000 PSI. 1.25 GPM with check valve to prevent back flow. U.S.A. | *$479.99 |
 | Prince PTO Tractor Pump 11.4 GPM, Model# HC-PTO-2A
Brand: Prince
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. Max. PSI: 2,000, Shaft Diameter (in.): 1 3/8, Shaft Type: Spline 6-tooth, GPM: 11.4, Material: Aluminum and cast iron, Rotations Per Minute: 540, Weight (lbs.): 36 | *$479.99 |
 | Subaru Robin 1.1 HP Gas Engine and 1" Centrifugal Pump
Brand: enginepowreedpumps.com Model: epp_PKV101 Part Number: epp_PKV101
The 1.1 HP Subaru Robin 4-cycle gas engine and Centrifugal Pump combination (PVK101) gives the operator excellent performance for clear water pump applications such as irrigating yards, draining pools and ponds, draining flooded basements and for construction purposes. This gas engine and pump coupling features a heavy-duty design, aluminum housing and an impeller with ceramic carbon mechanical seals. | *$474.02 |
 | Kodiak 1" Water Transfer Pump with Honda GX25 OHV Engine
Brand: enginepoweredpumps.com Model: epp_PWP1H Part Number: epp_PWP1H
The Kodiak 1" Water Transfer Pump unites with a 1.1 HP Honda GX25 4-stroke OHV gas engine to give the operator superior performance for agriculture, irrigation or water transfer purposes. These water transfer pumps are useable on the farm, at home, in your garden or for light commercial applications. The cast aluminum pump housing adds protection and portability for the operator. This water pump handles solids up to 1/4" (7 mm) in diameter. | *$470.38 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 4 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-04
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$47.61 |
| | 1/2 NPT Ports, 1 1/2 Inlet, 4 Port, Nylon Manifolds, White (1 Each)
Brand: Reid Supply Company Part Number: NM-24
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$47.61 |
 | IMPERIAL 91950 #H03912 SUCTION HOSE 3/4x1-3/8" ID
Brand: Imperial Model: 91950 Part Number: 91950
"IMPERIAL" SUCTION HOSE
Hose ID: 3/4"
Hose OD: 1-3/8
Working pressure: 300 psi
Minimum burst pressure: 1200 psi
Minimum bend radius: 5"
Temperature range: -40° F to 212° F
Weatherhead cross reference: H03912
Use with U-Series or 430 U-Series.
Typical application: hydraulic suction hose.
Marine application J1942/1 hydraulic only, ABS and MSHA accepted.
Hose Construction: Inner Tube: nitrile blend,Cover: neoprene,Reinforcement:
3/4" to 1-1/2" - one helical cable wire and one fiber braid.
2" - one helical, straight-stranded wire and one fiber braid. | *$469.99 |
 | 1 1/2 Bore x 1. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-22
Front Nose Mount - Double Acting | *$46.90 |
 | IMPERIAL 97402 HYDRAULIC QUICK COUPLER 3/8"
Brand: Imperial Model: 97402 Part Number: 97402
"IMPERIAL" HYDRAULIC QUICK COUPLER
Body Size: 3/8"
PSI: 4,000 lbs.
Cross Reference: H3-62
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 3/8ndash18;
Temperature Range: -40° F. to 250° F.
Can be used with Hydraulic Quick Coupler Nipple, Part No. #97412
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$46.69 |
| | IMPERIAL 96034 90° ELBOW SWIVEL ADAPTER - 1/2X3/4 (PACK OF 2)
Brand: Imperial Model: 96034 Part Number: 96034
"IMPERIAL" SWIVEL ADAPTER
Female Pipe Swivel to Male Pipe 90° Elbow Swivel Adapter Fitting.
Typical Application: Pressure hydraulic systems
Pressure: Up to 5,000 depending on size
Material: Carbon steel AISI/SAE12L14
Plating: Zinc; yellow dichromate finish
NPSM Swivel Nut: 1/214
Male Pipe Thread Size: 3/414
Cross Reference: 9405 x 8 x 12 | *$46.69 |
 | 3/4-16 Fine Thd., Parker Rod Clevises (1 Each)
Brand: Reid Supply Company Part Number: MFP-177
Rod Clevises | *$46.46 |
| 3/4 Bore x 5. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-9
Front Nose Mount - Double Acting | *$46.40 |
 | 1/8 NPT, 24 V DC, 3-Way Body Ported, ARO Selenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-400
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$46.29 |
| 1/8 NPT, 12 V DC, 3-Way Body Ported, ARO Selenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-405
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$46.29 |
| 1/8 NPT, 120 V AC, 3-Way Body Ported, ARO Selenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-395
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$46.29 |
| | IMPERIAL 99405 FLAT FACE O-RING CAP FITTING 1"(PACK OF 2)
Brand: Imperial Model: 99405 Part Number: 99405
"IMPERIAL" O-RING CAP FITTING
Tube Outside Diameter: 3/4
For-Seal Thread Size: 1-7/1612
Cross Reference: 4129 x 16
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Cap Fitting (Reference SAE No. 520112).
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$46.19 |
| | Simplex HJ35 11110 35 Ton 6-3/8" Lift Hydraulic Hand Jack
Brand: Simplex Part Number: 720-HJ35 | *$455.52 |
 | Udor Kappa 18 Pump Only (For Electric Motor)
Brand: justudorpumps.com Model: jup_K18DC Part Number: jup_K18DC
This Udor Kappa 18 Pump comes ready to couple to a 12 Volt electric motor (not included). This heavy-duty commercial pump features internally manifolded anodized aluminum construction and glass-filled nylon heads. This version of the Udor 18 pump is the replacement for the Kappa 18/12V pump and motor assembly. Use these Udor Kappa pumps for a range of agricultural, horticultural, and other lawn care spraying applications. Also perfect for pest control. | *$451.83 |
 | SFA Saniflo M200 Turboflush Grinder Upflush Toilet Pump
Brand: SFA Saniflo Model: M200 Part Number: M200
Model No. M200 Turboflush grinder pump is designed especially for a half bathroom for use with the toilet and lavatory. The model No. M200 provides for a 9' vertical discharge and up to 80' of horizontal pumping. Discharge pipe size is 3 4'' CPVC or PVC pipe so installation is easy. Lavatory can be discharged on either left or right side of pump with 1 1 2''. Electrical requirement is 120V. Now you can put a toilet and lavatory anywhere and not have to bust up the concrete. Use with Saniflo toilet tank model No. 005, round toilet bowl model No. 003 or elongated toilet bowl model No. 007 and your choice of toilet seat and model No. EXTEN 4000 extension pipe (all sold separetly). | *$450.72 |
| Silicone Coolant Hose, 31/4"
Brand: IWS
Silicone Coolant Hose, 3-1/4" ID x 3.62" OD, Working Pressure 25 PSI, 4 Feet Per Case | *$45.98 |
 | 1 1/2 Bore x 4. Stroke, Double Acting, Clevis Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-245
1-1/2" Bore Clevis Mount Double Acting | *$45.83 |
 | IMPERIAL 90950 FLARE TUBE PLUG 3/8-24" (PACK OF 5)
Brand: Imperial Model: 90950 Part Number: 90950
"IMPERIAL" FLARE TUBE PLUG
45° Flare Tube Plug Fitting.
45° Flare Tube Fittings conform to ASA, ASME, SAE, and Mil. specifications
Good resistance to vibration. Use Long Nut in applications with severe vibration.
45° Flare Tube Fittings flare fittings are reusable.
Used with copper, brass, aluminum, and steel hydraulic tubing that can be flared.
Working pressure up to 2,000 psi, depending upon tubing being used. (Will withstand burst pressure up to 5,000 psi).
Temperature Range: -65° F. to 250° F. at maximum operating pressures.
Tube Outside Diameter: 3/16"
Thread Size: 3/8-24" | *$45.78 |
 | H8S , FHK Series Hydraulic, Steel Socket, 1 in. Female Pipe
Brand: Foster Manufacturing | *$45.76 |
 | Reusable Male Inverted Flare 90 Deg. Teflon Reusable FittingThread Size 1/2-20"
Brand: IWS
Reusable Male Inverted Flare 90 Degree Teflon Reusable FittingThread Size 1/2-20", Hose ID 1/4", Drop Length 1.69" | *$45.69 |
| | IMPERIAL 97366 MANIFOLD COUPLING 1/4"x1/4" NPT (PACK OF 2)
Brand: Imperial Model: 97366 Part Number: 97366
"IMPERIAL" MANIFOLD COUPLING
NPT: 1/4"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.59 |
| 1 1/4 Bore x 2. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-17
Front Nose Mount - Double Acting | *$45.50 |
 | 1/4 NPT, 19.3 SCFM Flow, Parker Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-309
Needle, Check and Flow Control Valves | *$45.34 |
| | IMPERIAL 97367 MANIFOLD COUPLING 3/8"x1/4" NPT (PACK OF 2)
Brand: Imperial Model: 97367 Part Number: 97367
"IMPERIAL" MANIFOLD COUPLING
NPT: 3/8"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.19 |
 | 3/8 NPT, Parker Filters (1 Each)
Brand: Reid Supply Company Part Number: MFP-357
Filters - These filters provide excellent water removal efficiency. Unique deflector plate and shroud creates a swirling of the air stream, ensuring maximum water and dirt separation. Operating pressure is 150 psi and a temperature range of 32°F to 125°F. Each unit comes with a 40 micron filter and polycarbonate bowl. Metal and bowl guards sold separately. | *$45.03 |
| Reusable Male Inverted Flare 90 Deg. Teflon Reusable FittingThread Size 3/4-16"
Brand: IWS
Reusable Male Inverted Flare 90 Degree Teflon Reusable FittingThread Size 3/4-16", Hose ID 13/32", Drop Length 1.74" | *$45.00 |
 | Prince Hydraulic Hand Pump, 3000 PSI, Model# PM-HP-10B
Brand: Prince
Powerful! Operates a hydraulic press, dump, plow, snowblade, platform, frame straightener or similar equipment. 3 positions: 1) 1.25 cu. in. per stroke @1500 PSI, 2) .95 cu. in per stroke @ 2000 PSI, 3) .60 cu. in. per stroke @3000 PSI. One gallon reservoir. Inlet check valve, release valve. Pressure port 3/8in. NPT. Applied handle force 60-65 lbs. Use on up to 200 cu. inch, single- or double-acting cylinder. 16 1/2in.L. U.S.A. Max. PSI: 3,000, Material: Steel, Weight (lbs.): 30 | *$449.99 |
 | Haldex 1 HP 115/208-230 Volt AC Hydraulic Power Unit, Manual, Model# 1530038
Brand: Haldex
Mounts vertically or horizontally. 60 Hz TEFC motor turns at 3450 RPM. .097 displacement pump and 1.5 gallon reservoir. Relief valve set at 2000 PSI. 1.25 GPM with check valve to prevent back flow. U.S.A. | *$449.99 |
 | Diaphragm Repair Kit for RO 320/CC
Brand: justudorpumps.com Model: jup_8700_70 Part Number: jup_8700_70
This Diaphragm Repair Kit is compatible with the Udor RO 320/CC. The kit includes 6 Diaphragms, and 12 valve assembly o-rings. | *$443.84 |
 | Northman Fluid Power In-Line Hydraulic Flow Control Valve with Reverse Free Flow - 8 GPM, 3000 PSI, 3/8in. NPT Ports, Model# TCVT03
Brand: Northman Fluid Power
This Northman in-line adjustable flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is full free flow over a check valve. | *$44.99 |
 | Buyers Flush-Face Plug - 5/8in. Male; 3/4in. Port NPT, Model# FM1012
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$44.99 |
 | SAE 100R5 High Temperature Hydraulic Hose, ID. 1-3/8"
Brand: IWS
SAE 100R5 High Temperature Hydraulic Hose, ID. 1-3/8", OD.1.75", Working Pressure 500 PSI, Min. Burst Pressure 2000 PSI, Min. Bend Radius 10.5", Tube- Seamless oil resistant CPE rubber , Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -49° to 150°C (-55° to 302°F), air to 120°C (248°F), 0.67 Lbs. | *$44.60 |
| | IMPERIAL 90922 REPLACEMENT MALE ELBOW FITTING 5/1624"x1/8" (PACK OF 5)
Brand: Imperial Model: 90922 Part Number: 90922
"IMPERIAL" MALE ELBOW FITTING
Replacement Male Elbow Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Size: 1/8"
Thread Size: 5/1624"
Pipe Thread: 1/16"
Cross Reference: 284 x 2 x 1 | *$44.26 |
| 3/4 Bore x 4. Stroke, Double Acting - Front Block Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-59
Front Block Mount - Double Acting | *$44.14 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap.=1,250 lbs. (1 Each)
Brand: Enerpac Part Number: CAS-51
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
 | Jet 106200 JHC-200X 2 Ton Hydraulic Shop Crane
Brand: Jet Model: 106200 Part Number: 106200
Item #: 825-106200. pulliWt. Cap. = 2 tonsliLifting Height/Take-Up = 92.50 inliLoad Max: @ Reach = 1100 lbf @ 60 1/2 in, 2200 lbf @ 42 in, 3300 lbf @ 42 1/2 in, 4400 lbf @ 33 1/2 inliBase Length = 63 1/4 in [Min], 94 1/2 in [Max]liBase Width = 31 in [Min], 37 in [Max]liCord Height = 56 3/8 inliHandle Frame Cable Strap Control Operating Type = HydraulicliType = CraneliWt. = 273 lb/ul brCustomers also search for: Discount Jhc-200x Hydraulic Shopcrane 2 Ton, Buy Jhc-200x Hydraulic Shopcrane 2 Ton, Wholesale Jhc-200x Hydraulic Shopcrane 2 Ton, 662755234361, 106200, Hoists and Pullers | *$439.99 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SURS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$430.00 |
 | SHARKBITE BALL VALVE 1" [Misc.]
Brand: Sharkbite Model: 22223-0000 Part Number: 22223-0000
"SHARKBITE" BALL VALVE
*1" cash acme ball valve
with 1" Sharkbite fittings
*Ball valve rated to 600 PSI,
WOG 200 deg. F temperature
*1" demount clip included
*Ball valve listed by CSA, FM,
NSF and UL
*Boxed | *$43.99 |
 | 3/4 Bore x 6. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-71
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$43.91 |
