 | Enerpac Hydraulic Power Workholding Jam Nut No. JN-12, 1 7/8-16 (1 Each)
Brand: Enerpac Part Number: FN-481 | *$34.00 |
 | Water Worker HT-62B Precharged Tank
Brand: Water Worker Part Number: HT-62B
Engineered to provide years of trouble free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Waterworker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. 5 year warranty. Blue tank. | *$339.99 |
 | 20 Ton Air Floor Hydraulic Shop Press
Brand: ToolShopUSA
-Useful For: Straightening, Bending And Pressing,
Removing And Installing Gears, Bearings And Bushes
-"H" Type Structural Steel Frame, With High Stability,
Can Be Dismounted For Storage Or Transportation
Height Limit Valve
-When Piston Rod Reaches Its Limit It Stops Automatically Pump Can Be Operated By Hand Or With Air
Pro-Line Trading Corp.
1706 Potrero Ave.
South El Monte, CA 91733 | *$339.99 |
 | Haldex 12 Volt DC Power Unit, Solenoid Operation, Single-Acting, Model# 1261014
Brand: Haldex
The Haldex 12V DC power unit is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. Items 1076 and 1077 are for double acting cylinders; others are for single acting cylinders. U.S.A. | *$339.99 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Double Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-D-1100-R | *$337.40 |
 | SEPTLS490664028 - Hammerlok Coupling Links
Brand: Columbus McKinnon Model: 664028 Part Number: 490-664028
Hammerlok Coupling Links | *$33.99 |
 | IMPERIAL 97457 DOUBLE SHUT-OFF HYDRAULIC COUPLER NIPPLE 3/4"
Brand: Imperial Model: 97457 Part Number: 97457
"IMPERIAL" HYDRAULIC COUPLER NIPPLE
Body Size: 3/4"
Female Thread: 3/4 NPTF
Tomco No.: PA5606-31
Parker No.: 6602-12-12
Aeroquip No.: 5602-12-12S
Double Shut-Off (ISO "A") Quick Coupler Nipple.
Shut-off valves on the nipple and coupler.
Interchangeability with other leading manufacturers.
Rated at a working pressure of 4,000 psi.
Temperature Range: -40° to 225° F.
Seals are made of Buna-N material.
Exceeds ISO 7241-1, series "A" specifications.
Hose protection is the result of swivel action allowed by the coupler.
Used with Double Shut-Off (ISO "A") Quick Coupler, Part No. #97456
Positive alignment and even load distribution provided by the ball-locking mechanism. | *$33.89 |
 | IMPERIAL 97401 HYDRAULIC QUICK COUPLER 1/4"
Brand: Imperial Model: 97401 Part Number: 97401
"IMPERIAL" HYDRAULIC QUICK COUPLER
Body Size: 1/4"
PSI: 5,000 lbs.
Cross Reference: H2-62
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 1/4ndash18;
Temperature Range: -40° F. to 250° F.
Can be used with Hydraulic Quick Coupler Nipple, Part No. 97411
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$33.65 |
| | 1 1/4 Bore x 2. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-175
1-1/4" Bore Stud Mount Double Acting | *$33.49 |
 | IMPERIAL 97736 "SERIES 320" QUICK DISCONNECT COUPLER 1/2"MNPT - HIGH FLOW
Brand: Imperial Model: 97736 Part Number: 97736
"IMPERIAL" QUICK DISCONNECT COUPLER
Body Size: 1/4"
Male NPT: 1/2"
High flow design.
Material: brass/steel.
Plating: Nickel
Flow Capacity: 74.3 CFM
Coupler Body Male Pipe Thread.
Maximum Working Pressure: 232 psi (16 bar)
Minimum Burst Pressure: 2030 psi (140 bar)
Male threads come with preapplied thread sealant.
Not interchangeable with any other system or design of couplers.
Heavy-duty quick disconnect couplers high flow series 320 | *$33.49 |
 | IMPERIAL 97739 "SERIES 320" QUICK DISCONNECT COUPLER 1/2"FM NPT - HIGH FLOW
Brand: Imperial Model: 97739 Part Number: 97739
"IMPERIAL" QUICK DISCONNECT COUPLER
Body Size: 1/4"
Female NPT: 1/2"
High flow design.
Material: brass/steel.
Plating: Nickel
Flow Capacity: 74.3 CFM
Coupler Body female Pipe Thread.
Maximum Working Pressure: 232 psi (16 bar)
Minimum Burst Pressure: 2030 psi (140 bar)
Male threads come with preapplied thread sealant.
Heavy-duty quick disconnect couplers high flow series 320
Not interchangeable with any other system or design of couplers. | *$33.49 |
 | 1/4 NPT, Parker Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-364
Regulators with Gauge - These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures. Pressure range is 2-125 psi and temperature range is 32°F to 125°F. | *$33.26 |
 | IMPERIAL 97414 HYDRAULIC QUICK COUPLER NIPPLE 3/4"
Brand: Imperial Model: 97414 Part Number: 97414
"IMPERIAL" HYDRAULIC QUICK COUPLER NIPPLE
Body Size: 3/4"
PSI: 2,500 lbs.
Cross Reference: H6-63
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 3/4"ndash14;
Temperature Range: -40° F. to 250° F.
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
Can be used with Hydraulic Quick Coupler Nipple, Part No. 97401
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$33.19 |
 | Haldex 12 Volt DC Power Unit - Manual Operation, Single Acting, Model# 1261033
Brand: Haldex
The Haldex 12V DC power unit is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. U.S.A. Flow (GPM): 1.4 GPM at 1,600 PSI, Reservoir Capacity: 3 qt., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, Volts: 12 DC | *$329.99 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 2500 PSI, 5in. Bore, 18in. Stroke, Model# 50TL18-200
Brand: Lion 2500
Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High -tensile steel shaft is precision ground, polished and hard chrome plated. Max. PSI: 2,500, Bore Diameter (in.): 5, Stroke Length (in.): 18, Closed Pin Center (in.): 30 1/4, Shaft Diameter (in.): 2 | *$329.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2in. Bore, 16in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 2 | *$329.99 |
 | Reliance/Added Sales 6-50-DOLS Reliance 606 Features
Brand: Reliance Part Number: 6-50-DOLS
Compliant with requirements based on the National Appliance Energy Conservation Act (NAECA) that became effective on 1 19 04. 6 Year Tank Warranty6 Year Parts WarrantyGlass Lined TankConvenient Temperature ControlTwo 4500W Elements, 240VR Value 16.002'' Foam InsulationAlmond Jacket with Almond TrimLow boy Series are Top Plumbed 3 4'' Inlet OutletTemperature and Pressure Relief Valve Installed3 4'' F.I.P.S. inlet end outlet located on top of heater {text} %Units manufactured in 1999 and 2000 use a special 1 3 8'' diameter element model No. 9002442TR. | *$327.29 |
| | IMPERIAL 99401 FLAT FACE O-RING CAP FITTING 3/8(PACK OF 5)
Brand: Imperial Model: 99401 Part Number: 99401
"IMPERIAL" O-RING CAP FITTING
Tube Outside Diameter: 3/8
For-Seal Thread Size: 11/1616
Cross Reference: 4129 x 6
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Cap Fitting (Reference SAE No. 520112).
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$32.89 |
| | IMPERIAL 99473 FLAT FACE STRAIGHT THREAD O-RING 90° ELBOW FITTING 1/2X1/2(PACK OF 2)
Brand: Imperial Model: 99473 Part Number: 99473
"IMPERIAL" O-RING 90° ELBOW FITTING
Port Thread: 1/2"
Material: 12L14 steel.
Sealing Method: O-Ring.
Tube Outside Diameter: 1/2"
For-Seal Thread Size: 13/1616
Cross Reference: 4515 x 8
Excellent vibration resistance.
Maximum operating presure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing.
Flat Face O-Ring Straight Thread O-Ring 90° Elbow Fitting (Reference SAE No. 520220). | *$32.89 |
| | IMPERIAL 99472 FLAT FACE STRAIGHT THREAD O-RING 90° ELBOW FITTING 3/8X1/2(PACK OF 2)
Brand: Imperial Model: 99472 Part Number: 99472
"IMPERIAL" O-RING 90° ELBOW FITTING
Port Thread: 1/2"
Material: 12L14 steel.
Sealing Method: O-Ring.
Tube Outside Diameter: 3/8"
For-Seal Thread Size: 11/1616
Cross Reference: 4515 x 6 x 8
Excellent vibration resistance.
Maximum operating presure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing.
Flat Face O-Ring Straight Thread O-Ring 90° Elbow Fitting (Reference SAE No. 520220). | *$32.79 |
| | IMPERIAL 99412 FLAT FACE O-RING PLUG FITTING 1/2(PACK OF 5)
Brand: Imperial Model: 99412 Part Number: 99412
"IMPERIAL" O-RING PLUG FITTING
Tube Outside Diameter: 1/2
For-Seal Thread Size: 13/1616
Cross Reference: 4229 x 8
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Plug Fitting (Reference SAE No. 520109)
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$32.59 |
 | 3/4 Bore x 1. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-66
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$32.57 |
 | 1/8 NPT, 8.8 SCFM Flow, Parker Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-308
Needle, Check and Flow Control Valves | *$32.27 |
 | Haldex Hydraulic Pump - 22 GPM, 2-Stage, Model# 1080035
Brand: Haldex
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. | *$319.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 36in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 36, Closed Pin Center (in.): 46 1/4, Shaft Diameter (in.): 1 3/4 | *$319.99 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 3000 PSI, 5in. Bore, 14in. Stroke, Model# 50TH14-200
Brand: Lion 3000
Built tough for agricultural and industrial applications. 3000 PSI model is designed to withstand shock loads of up to 6000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High-tensile steel shaft is precision ground, polished and hard chrome plated. Cylinder can be single or double acting. Attach one port for single and both ports for double acting. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 14, Closed Pin Center (in.): 26 1/4, Shaft Diameter (in.): 2 | *$319.99 |
 | Flow Meter With Thermometer
Brand: Northern Tool Equipment
Handles up to 32 GPM at 6000 PSI. Includes 180deg F thermometer. Otherwise, similar to #2048. | *$319.99 |
 | Prince 3 Spool Control Valve, Model# HC-V-R21
Brand: Prince
Three spool control valve with float on one spool. Load checks each spool, to 25 GPM. Relief valve preset at 2000 PSI; adjusts from 1500-3000 PSI. Power beyond capacity. 3/4in. inlet/outlet ports, 1/2in. work ports. USA | *$319.99 |
 | Prince Heavy Duty Hydraulic Motor - 14 GPM, 1300 PSI
Brand: Prince
For light and medium duty applications. Replacement for Charlynn H, White HS, and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible, 4-bolt mount with 1in. x 1 3/4in. shaft with 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. | *$319.99 |
 | Porto-Power 10-Ton Pump - 200-10,000 PSI
Brand: Porto-Power
Lightweight and compact pump has aluminum pump head for maximum corrosion resistance. 2-speed operation reduces handle strokes. Noncorrosive fiberglass handle for operator safety. Lower handle effort minimizes operator fatigue while handle lock allows for easy carrying. Internal pressure relief valve for overload protection. | *$319.99 |
 | Enerpac Hydraulic Power Workholding Sequence Valve For Time Interval Control No. V-2000 (1 Each)
Brand: Enerpac Part Number: V-2000
These valves can be plumbed to provide a sequence of clamping functions from just one hydraulic power source. Sequenced locating, clamping, and/or supporting functions can be controlled in a logical order by plumbing one sequence valve to each clamping group requiring a different time interval. The valve can be preset to different pressure values, allowing fluid flow in sequence as the hydraulic pressure increases in the entire system to whatever the power source provides, after all valves are open. These valves are basically timers, not pressure controllers. The VE-211 features a lock nut which secures the hydraulic pressure setting for the secondary circuit and a tamper proof cover can be placed over the set screw. Maximum operating pressure is 5,000 psi. | *$319.00 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Double Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-D-475-R | *$311.44 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Single Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-S-475 | *$311.44 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Single Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-S-475-R | *$311.44 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Double Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-D-475 | *$311.44 |
 | De-Sta-Co Hydraulic Power Workholding, Hollow Cylinder, I.D.=.63, Port=#4 SAE (1 Each)
Brand: De-Sta-Co Part Number: 020-013-031DE
These hollow cylinders can be used to push or pull depending on the position of the ram. They will actuate a rod of any length or shape and are extremely effective in translating power to a remote location. Larger piston diameter provides greater clamping force. Hardened steel piston and rod. Supplied with through hole insert threaded into the top. Optional thread inserts (inch/metric) are available as special order. An accessory adapter plate,which fastens to the ram base and permits mounting the ram with a single cap screw is also available as special order. Please call for price and delivery. Maximum input pressure is 3,500 psig. | *$310.73 |
 | Huffy Sports 8406S Universal Mounting Bracket
Brand: Huffy Part Number: 8406S
For pole, wall, or roof mount . Comes equipped with two 3 1 2'' diameter U bolts for pole mount. Heavy angle iron bracket designed for mounting backboards to pole or flat surface. Assembly instructions included. Black. NBA endorsed, color litho carton. | *$31.99 |
| 5/16 Bore x 4. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-65
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$31.99 |
 | 3/8 NPT Ports, 1/2 NPT Inlet, 8 Port, 1.50 W x 12.25 Lg., Aluminum Single Sided Port Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: MM-430
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$31.96 |
 | 3/8 NPT Inlet Port, 3/8 NPT Cyl. Port, 3/8 NPT Exaust Port, 240 SCFM Flow, Parker Quick Exhaust and Shuttle Valves w/Urethane DiaPhram (1 Each)
Brand: Reid Supply Company Part Number: MFP-214
Quick Exhaust and Shuttle Valves With Urethane Diaphragm | *$31.63 |
 | IMPERIAL 90891 REPLACEMENT FITTING UNION 1/8" (PACK OF 5)
Brand: Imperial Model: 90891 Part Number: 90891
"IMPERIAL" FITTING UNION
Replacement Union Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Outside Diameter: 1/8"
Thread Size: 5/1624"
Cross Reference: 283 x 2 | *$31.57 |
 | IMPERIAL 97439 "SERIES 310" QUICK DISCONNECT COUPLER 1/2"FM-NPT
Brand: Imperial Model: 97439 Part Number: 97439
"IMPERIAL" QUICK DISCONNECT COUPLER
Body Size: 1/4"
Female NPT: 1/2"
Flow Capacity: 32.6 CFM
Material: brass/steel.
Plating: Nickel
Coupler Body female Pipe Thread
Maximum Working Pressure: 232 psi (16 bar)
Minimum Burst Pressure: 2030 psi (140 bar)
Heavy-duty quick disconnect couplers industrial series 310
Offers a higher flow capacity compared to standard quick couplers.
Male threaded couplers come with preapplied thread sealant.
Industrial style interchange. Use with standard industrial design plugs. | *$31.49 |
 | 3/4 Bore x 4. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-8
Front Nose Mount - Double Acting | *$31.31 |
| | 1 1/4 Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-170
1-1/4" Bore Stud Mount Double Acting | *$31.19 |
 | 7/16-20 Fine Thd., Parker Rod Clevises (1 Each)
Brand: Reid Supply Company Part Number: MFP-176
Rod Clevises | *$31.03 |
 | Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 30in. Stroke, 2in. Shaft Size, Model# PMC-5630
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 30, Closed Pin Center (in.): 39, Shaft Diameter (in.): 2 | *$309.99 |
 | SHURflo 5904-0201 Smart Sensor Pump 12 VDC
Brand: SHURflo
OEM 5900-0201Aftermarket 5900-0211Description Seamless Shell w/ Electro-Coating. Variable Speed. Multi-Fixture Pump w/ Amp Current Limiter | *$308.85 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2129-25 (1 Each)
Brand: Enerpac Part Number: CY2129-25
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$301.00 |
 | SHURflo 4111-035 Power Twin Pump with dual manifolds 12VDC
Brand: SHURflo
The shurflo power twin pump is one of the most efficient 12 Vdc high-flow, self-priming pumps and features a dual manifold system with 5/8 hose barb ports and a thermally protected motor with heat sink for extended operation. It is capable of delivering up to 6.25 GPM. | *$300.25 |
 | IMPERIAL 96088 FEMALE PIPE SWIVEL TO FEMALE PIPE SWIVEL ADAPTER - 1/4X1/4(PACK OF 5)
Brand: Imperial Model: 96088 Part Number: 96088
"IMPERIAL" SWIVEL ADAPTER
Typical Application: Pressure hydraulic systems
Pressure: Up to 5,000 depending on size
Material: Carbon steel AISI/SAE12L14
Plating: Zinc; yellow dichromate finish
NPSM Swivel Nut: 1/418
Female Pipe Thread Size: 1/418
Cross Reference: 9255 x 4 x 4 | *$30.89 |
