 | SunPump 85850 PVA -30-M1 Pump Controller
Brand: SunPump
PVA Series Pump Controller (Voltage Booster)High quality, Micro-processor controlled DC power converters designed as the interface between a DC powered pump and the DC power source. | *$460.65 |
 | Large Angle Type Mount
Brand: Northern Tool Equipment
For use with the 22 GPM two stage SAE A flange pumps. | *$46.99 |
 | Brush Research (BRMGBD3) 3in. 180 Grit Flex Engine Cylinder Hone
Brand: Brush Research Part Number: BRMGBD3
WE CANNOT SHIP THIS ITEM TO APO ADDRESSES. | *$46.98 |
 | 1 1/2 Bore x 1. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-22
Front Nose Mount - Double Acting | *$46.90 |
 | IMPERIAL 97402 HYDRAULIC QUICK COUPLER 3/8"
Brand: Imperial Model: 97402 Part Number: 97402
"IMPERIAL" HYDRAULIC QUICK COUPLER
Body Size: 3/8"
PSI: 4,000 lbs.
Cross Reference: H3-62
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 3/8ndash18;
Temperature Range: -40° F. to 250° F.
Can be used with Hydraulic Quick Coupler Nipple, Part No. #97412
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$46.69 |
| | IMPERIAL 96034 90° ELBOW SWIVEL ADAPTER - 1/2X3/4 (PACK OF 2)
Brand: Imperial Model: 96034 Part Number: 96034
"IMPERIAL" SWIVEL ADAPTER
Female Pipe Swivel to Male Pipe 90° Elbow Swivel Adapter Fitting.
Typical Application: Pressure hydraulic systems
Pressure: Up to 5,000 depending on size
Material: Carbon steel AISI/SAE12L14
Plating: Zinc; yellow dichromate finish
NPSM Swivel Nut: 1/214
Male Pipe Thread Size: 3/414
Cross Reference: 9405 x 8 x 12 | *$46.69 |
 | 3/4-16 Fine Thd., Parker Rod Clevises (1 Each)
Brand: Reid Supply Company Part Number: MFP-177
Rod Clevises | *$46.46 |
| 3/4 Bore x 5. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-9
Front Nose Mount - Double Acting | *$46.40 |
 | 1/8 NPT, 120 V AC, 3-Way Body Ported, ARO Selenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-395
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$46.29 |
| 1/8 NPT, 12 V DC, 3-Way Body Ported, ARO Selenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-405
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$46.29 |
| 1/8 NPT, 24 V DC, 3-Way Body Ported, ARO Selenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-400
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$46.29 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 4 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-04
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$46.22 |
| | 1/2 NPT Ports, 1 1/2 Inlet, 4 Port, Nylon Manifolds, White (1 Each)
Brand: Reid Supply Company Part Number: NM-24
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$46.22 |
| | IMPERIAL 99405 FLAT FACE O-RING CAP FITTING 1"(PACK OF 2)
Brand: Imperial Model: 99405 Part Number: 99405
"IMPERIAL" O-RING CAP FITTING
Tube Outside Diameter: 3/4
For-Seal Thread Size: 1-7/1612
Cross Reference: 4129 x 16
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Cap Fitting (Reference SAE No. 520112).
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$46.19 |
| | SEPTLS277A13 - Base/Collar/Plunger Attachments
Brand: Enerpac Part Number: 277-A-13
Base/Collar/Plunger Attachments | *$46.04 |
 | SEPTLS490664038 - Hammerlok Coupling Links
Brand: Columbus McKinnon Model: 664038 Part Number: 490-664038
Hammerlok Coupling Links | *$45.99 |
 | 3/8 NPT Ports, 1. Inlet, 4 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-203
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$45.79 |
| | IMPERIAL 90950 FLARE TUBE PLUG 3/8-24" (PACK OF 5)
Brand: Imperial Model: 90950 Part Number: 90950
"IMPERIAL" FLARE TUBE PLUG
45° Flare Tube Plug Fitting.
45° Flare Tube Fittings conform to ASA, ASME, SAE, and Mil. specifications
Good resistance to vibration. Use Long Nut in applications with severe vibration.
45° Flare Tube Fittings flare fittings are reusable.
Used with copper, brass, aluminum, and steel hydraulic tubing that can be flared.
Working pressure up to 2,000 psi, depending upon tubing being used. (Will withstand burst pressure up to 5,000 psi).
Temperature Range: -65° F. to 250° F. at maximum operating pressures.
Tube Outside Diameter: 3/16"
Thread Size: 3/8-24" | *$45.78 |
 | H8S , FHK Series Hydraulic, Steel Socket, 1 in. Female Pipe
Brand: Foster Manufacturing | *$45.76 |
| | IMPERIAL 97366 MANIFOLD COUPLING 1/4"x1/4" NPT (PACK OF 2)
Brand: Imperial Model: 97366 Part Number: 97366
"IMPERIAL" MANIFOLD COUPLING
NPT: 1/4"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.59 |
| 1 1/4 Bore x 2. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-17
Front Nose Mount - Double Acting | *$45.50 |
 | 1/4 NPT, 19.3 SCFM Flow, Parker Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-309
Needle, Check and Flow Control Valves | *$45.34 |
| | IMPERIAL 97367 MANIFOLD COUPLING 3/8"x1/4" NPT (PACK OF 2)
Brand: Imperial Model: 97367 Part Number: 97367
"IMPERIAL" MANIFOLD COUPLING
NPT: 3/8"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.19 |
 | 3/8 NPT, Parker Filters (1 Each)
Brand: Reid Supply Company Part Number: MFP-357
Filters - These filters provide excellent water removal efficiency. Unique deflector plate and shroud creates a swirling of the air stream, ensuring maximum water and dirt separation. Operating pressure is 150 psi and a temperature range of 32°F to 125°F. Each unit comes with a 40 micron filter and polycarbonate bowl. Metal and bowl guards sold separately. | *$45.03 |
 | Prince Hydraulic Hand Pump, 3000 PSI, Model# PM-HP-10B
Brand: Prince
Powerful! Operates a hydraulic press, dump, plow, snowblade, platform, frame straightener or similar equipment. 3 positions: 1) 1.25 cu. in. per stroke @1500 PSI, 2) .95 cu. in per stroke @ 2000 PSI, 3) .60 cu. in. per stroke @3000 PSI. One gallon reservoir. Inlet check valve, release valve. Pressure port 3/8in. NPT. Applied handle force 60-65 lbs. Use on up to 200 cu. inch, single- or double-acting cylinder. 16 1/2in.L. U.S.A. | *$449.99 |
| SunPump 85804 PCA-30-M1 Pump Controller
Brand: SunPump
Sunpumps PCA series pump controllers are high quality, micro-processor contolled DC power converters designed as the interface between a DC powered pump and the power source. The main purpose of a PC series controller is to maximize the total daily water delivery while providing protection for the pump as well as the power source.One of the features of a pump controller is to boost the current of solar modules in low sunlight conditions while holding the voltage of the solar modules around the maxmimum power point. This allows a pump to start earlier in the morning and stay running longer in the evening.All PC series controllers include a pump speed control circuit, a remote switch circuit, a sensor-less low water cut-off circuit, an electronic circuit breaker and indicator lights. | *$444.49 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2754-5 (1 Each)
Brand: Enerpac Part Number: CY2754-5
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$443.00 |
 | Buyers Flush-Face Plug - 5/8in. Male; 3/4in. Port NPT, Model# FM1012
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$44.99 |
 | Northman Fluid Power In-Line Hydraulic Flow Control Valve with Reverse Free Flow - 8 GPM, 3000 PSI, 3/8in. NPT Ports, Model# TCVT03
Brand: Northman Fluid Power
This Northman in-line adjustable flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is full free flow over a check valve. | *$44.99 |
| | 1 1/2 Bore x 4. Stroke, Double Acting, Clevis Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-245
1-1/2" Bore Clevis Mount Double Acting | *$44.79 |
 | Sunex Tools (SUN52PPK3) 3 Piece PressPunch Kit
Brand: Sunex Part Number: 52PPK3
strongFeatures and Benefits/strongul liFor use with presses up to 50 tons/li liThree punch sizes: 1/2", 1' and 2"/li liMade in U.S.A./li/ul | *$44.33 |
| | IMPERIAL 90922 REPLACEMENT MALE ELBOW FITTING 5/1624"x1/8" (PACK OF 5)
Brand: Imperial Model: 90922 Part Number: 90922
"IMPERIAL" MALE ELBOW FITTING
Replacement Male Elbow Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Size: 1/8"
Thread Size: 5/1624"
Pipe Thread: 1/16"
Cross Reference: 284 x 2 x 1 | *$44.26 |
 | 3/4 Bore x 4. Stroke, Double Acting - Front Block Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-59
Front Block Mount - Double Acting | *$44.14 |
| 3/8 NPT Ports, 3/4 Inlet, 4 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-201
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$44.13 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap.=1,250 lbs. (1 Each)
Brand: Enerpac Part Number: CAS-51
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
 | Jet 106200 JHC-200X 2 Ton Hydraulic Shop Crane
Brand: Jet Model: 106200 Part Number: 106200
2 Ton Hydraulic Crane Type: Hydraulic Load Capacity: 4400 | *$439.99 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SURS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$430.00 |
 | 3/4 Bore x 6. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-71
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$43.91 |
| | 1 1/2 Bore x 3. Stroke, Double Acting, Clevis Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-240
1-1/2" Bore Clevis Mount Double Acting | *$43.31 |
 | Haldex 1 HP 115/208-230 Volt AC Hydraulic Power Unit, Manual, Model# 1530038
Brand: Haldex
Mounts vertically or horizontally. 60 Hz TEFC motor turns at 3450 RPM. .097 displacement pump and 1.5 gallon reservoir. Relief valve set at 2000 PSI. 1.25 GPM with check valve to prevent back flow. U.S.A. | *$429.99 |
 | Grundfos IO 101 SQFlex Generator Interface Box for Solar Water Pump
Brand: Grundfos
IO 101Acts as interface for powering back-up supplies, providing automatic change-over. For instance when changing from generator to solar energy, the solar panels automatically power the system as soon as the fuel tank runs dry. | *$424.28 |
 | SFA Saniflo M200 Turboflush Grinder Upflush Toilet Pump
Brand: SANIFLO Model: M200 Part Number: M200
Model No. M200 Turboflush grinder pump is designed especially for a half bathroom for use with the toilet and lavatory. The model No. M200 provides for a 9' vertical discharge and up to 80' of horizontal pumping. Discharge pipe size is 3 4'' CPVC or PVC pipe so installation is easy. Lavatory can be discharged on either left or right side of pump with 1 1 2''. Electrical requirement is 120V. Now you can put a toilet and lavatory anywhere and not have to bust up the concrete. Use with Saniflo toilet tank model No. 005, round toilet bowl model No. 003 or elongated toilet bowl model No. 007 and your choice of toilet seat and model No. EXTEN 4000 extension pipe (all sold separetly). | *$422.44 |
 | 5/32 Connection, NNP, Plastic Roller, Parker Limit Switches (1 Each)
Brand: Reid Supply Company Part Number: MFP-480
Limit Switches | *$42.84 |
| | IMPERIAL 99402 FLAT FACE O-RING CAP FITTING 1/2 (PACK OF 5)
Brand: Imperial Model: 99402 Part Number: 99402
"IMPERIAL" O-RING CAP FITTING
Tube Outside Diameter: 1/2
For-Seal Thread Size: 13/1616
Cross Reference: 4129 x 8
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Cap Fitting (Reference SAE No. 520112).
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$42.79 |
 | 1/4 NPT, 19.3 SCFM Flow, Parker Needle Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-301
Needle, Check and Flow Control Valves | *$42.57 |
 | K6S/S , FHK Series Hydraulic, Stainless Steel Plug, 3/4 in. Female Pipe
Brand: Foster Manufacturing | *$42.53 |
 | Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 48in. Stroke, 2in. Shaft Size
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 48, Closed Pin Center (in.): 58, Shaft Diameter (in.): 2 | *$419.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 36in. Stroke, 2in.Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 36, Closed Pin Center (in.): 48 1/4, Shaft Diameter (in.): 2 | *$419.99 |
 | Westward 3ZC69 Ram System, 10 Ton
Brand: WestWard Tools
Hydraulic Ram System, Capacity 10 Tons, Stroke 6 Inches, 4 Extension Tube Sizes, Complete Kit with Pump Ram and Accessories | *$414.68 |
 | 1 1/2 Bore x 4. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-225
1-1/2" Bore Stud Mount Double Acting | *$41.97 |
